Broadworks Configuration; Broadworks Device Profile Type Configuration - Cisco BroadSoft BroadWorks Spectralink 84 Series Configuration Manual

3

BroadWorks Configuration

This section identifies the required BroadWorks device profile type for the Spectralink 84xx
Series as well as any other unique BroadWorks configuration required for interoperability
with the 84xx Series.
3.1

BroadWorks Device Profile Type Configuration

This section identifies the device profile type settings to use when deploying the
Spectralink 84xx Series with BroadWorks.
Create a device profile type for the Spectralink 84xx Series with settings as shown in the
following example. A separate device profile type should be created for each Spectralink
84xx Series model. The settings shown are recommended for use when deploying the
Spectralink 84xx Series with BroadWorks. For an explanation of the profile parameters,
see the BroadWorks Device Management Configuration Guide [3].
The device profile type shown below provides the Number of Ports (number of SIP lines)
setting for Spectralink 8440. For other 84xx Series models, create a new device profile
type and set the Number of Ports to match the available number of SIP lines per model
according to the following table.
Model
Spectralink 8440
Spectralink 8441
Spectralink 8452
Spectralink 8453
BROADSOFT PARTNER CONFIGURATION GUIDE – SPECTRALINK 84XX SERIES
© 2018 BROADSOFT INC.
Number of Lines
6
6
6
6
20-BD5605-00
PAGE 16 OF 34