Zone 12Vdc Trigger Outputs - Russound XStream X5 Installation Manual

There is one 12VDC trigger on the back of the XStream™ X5. The 3.5mm jack
provides 12VDC 100mA when the X5 is turned on and is disengaged when the
X5 zone is turned off. The trigger can be used to engage any 12VDC trigger
device or component that does not exceed 100mA such as a subwoofer or
Diagram below shows connection to a subwoofer and an external amplifier for greater sound output for larger rooms
Subwoofer
12V Trigger Cable
RCA Cable
RCA Cable
Russound X5 Controller Streamer Amplifier Installation Manual
another amplifier. The connection for the trigger output is made using a two-
conductor cable with 3.5mm male mono plug at each end. The tip is positive
(+) and sleeve is negative (-).
Set the Line Output to Variable in the SCS menu.

ZONE 12VDC TRIGGER OUTPUTS

31