Russound XSource Installation Manual

Hide thumbs

Table Of Contents

XSource

Streaming Media Player

Installation Guide

Table of Contents

Summary of Contents for Russound XSource

Page 1 XSource Streaming Media Player Installation Guide...
Page 2 Russound Sales Representative for more information. Note: If you are a Russound Certified Installer and you plan on installing this product on a job site that may not have working internet access, please configure the unit at your shop or other location where internet access is available BEFORE you take it to the job site.
Page 3: Table Of Contents
• Supports local favorites solution to add high quality streaming audio content to any audio system. The XSource can be used as a single stereo • Onboard web-based configuration, accessible from a audio streaming source for a single room, or supply a single...
Page 4: Web Configuration
IP address or Hostname in an internet browser on a smartphone, tablet, or laptop that is connected to the same network as the XSource. Using Web Config, the XSource can be completely configured, quickly and easily, from the palm of your hand.
Page 5: Ethernet Connection And Factory Reset
DHCP. A 10-second MyRussound App or the XTS Touchscreen. The default press and hold will reset the XSource to its factory default network setting is DHCP-enabled, but the XSource can be settings.
Page 6: Installation Overview
INSTALLATION OVERVIEW 3. Keep all power cords away from all signal cables to The XSource can be rack-mounted, table-mounted or wall- mounted. You can connect multiple XSource media players prevent humming caused by induced noise. by using the integrated slide connectors as shown. For wall- 4.
Page 7: Installation
Connect an Ethernet cable from an open network port on the into the web browser on your phone, tablet, or PC connected home network to the Ethernet port on the rear of the XSource. to the same network as the XSource. For your convenience,...
Page 8: Configuration
Russound C-Series or MCA-Series controller. Naming the XSource – Enter the desired name for this XSource. This name will be visible to end users in the list of Zone mode is used for connecting an XSource as a available Apple AirPlay devices and Spotify Connect devices streaming audio player with any other amplifier or receiver.
Page 9 Configuration > Source Settings page. Note: This step shows the basic configuration when using • Enter a name for the XSource in the appropriate Source an MCA-Series controller including the MCA-66, MCA-88 or Name field that corresponds to the source number MCA-88X.
Page 10 Step 2. Step 5. Naming the XSource – The name you choose will be visible to all users in the MyRussound App or other user interface Adjusting the Volume Trim (Optional) - The Volume Trim is when selecting the zone or room that they wish to control.
Page 11 All On Participation – When Enabled (Default), this XSource will turn on when an “All On” signal is received. If you do not want this XSource to participate in an All On command, choose Disabled on this page. Examples of rooms where you might want this setting disabled are certain bedrooms or children’s nurseries where such participation would not...
Page 12: Configuration
XSource. Note that information. This is done so that each device can have its the XSource Device Name that you set in Web Config will be own independent user in a home so that users will not have the same name that appears in the Spotify Connect menu to share accounts or favorites with anyone else in the home.
Page 13: Troubleshooting
For networking issues, resetting network gear in the home such as the router or any switches between the XSource and the router may also resolve any issues. If you have the XSource configured with a static IP...
Page 14: Audio Connection With Mca-Series Controllers
AUDIO CONNECTIONS WITH MCA-SERIES CONTROLLER RJ-45 CAT-5 Wiring Scheme The XSource can be used with a Russound MCA-Series controller and supported user interfaces to access all RJ-45 features and provide amplification for speakers in multiple locations. Use the diagram below as an example of possible wiring...
Page 15: Additional Audio Connections
ADDITIONAL CONNECTION DIAGRAMS XSource Wireless network Phone or Tablet router CAT-5 RCA cable D250LS Ampli er Connection with D250LS amplifier Wireless network Phone or Tablet router CAT-5 Optical Home Theater Receiver Connection with home theater receiver Russound XSource Installation Guide...
Page 16: Network Best Practices
- voice, video, best effort and background. Check for firmware updates available for your Russound UPnP: Universal Plug and Play uses Multicast and allows equipment to make sure they are up-to-date in order to media servers and streaming devices to communicate.
Page 17: Technical Specifications
OGG Vorbis, FLAC (8, 16-bit). AAC, AAC+ (supports up to 24-bit/192 kHz) Power Requirements: Input: 100-240V~50/60Hz 0.4A Output: 12VDC, 1A Dimensions: 4"W x 6.375"D x 1.75"H (10.2 x 16.2 x 4.4cm) Weight: 1.2 lbs. (0.54 kg) Russound XSource Installation Guide...
Page 18: Safety Instructions
This Class B digital apparatus complies with Canadian dropped or the enclosure is damaged. ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Russound XSource Installation Guide...
Page 19 Russound XSource Installation Guide...
Page 20 This product includes some software components that are licensed under the General Public License (GPL). Source code for GPL components is available upon request. ©2015 Russound. All rights reserved. All trademarks are the property of their respective owners. Specifications are subject to change without notice.

Russound XSource Installation Manual

Table of Contents

Related Manuals for Russound XSource

Summary of Contents for Russound XSource

Table of Contents