Russound XStream X5 Installation Manual page 10

CONNECTING XSTREAM X5 TO YOUR HOME NETWORK
5. Enter security information and press connect. On the confirmation screen,
press continue.
6. The X5 will now connect to the network. Once the green LED on the front panel turns
solid, the X5 has successfully connected to the network.
If the yellow LED begins to blink, the X5 could not connect to the specified network.
Follow the steps shown in the dialog box below.
10 Russound X5 Controller Streamer Amplifier Installation Manual
Changing from a wired to a wireless connection:
1. Disconnect the Ethernet cable from the X5. The orange LED will flash
rapidly.
2. While the orange LED is flashing, the X5 needs to be reinitialized into Access
Point Mode. Depress the Factory Reset button on the bottom panel for 2
seconds. The yellow and green LEDs will blink 6 times before going solid,
indicating the X5 is in Access Point mode.
See instructions on pg 8-10 for "making a wireless connection".
Host Name
Host Name