Additional Settings; Adjust The Image - Axis P3715-PLVE User Manual

AXIS P3715-PLVE Network Camera

Additional settings

Additional settings

Adjust the image

If you want to know more about different image settings, see Learn more on page 16.
Level the camera
To adjust the view in relation to a reference area or object, use the leveling guide in combination with a mechanical adjustment
of the camera.
1. Go to Settings > System > Orientation and click
2. Adjust the camera mechanically until the position of the reference area or object, is aligned with the leveling guide.
Adjust the zoom and focus
To adjust the zoom:
1. Go to Settings > Image > Zoom and use the slider to adjust the zoom.
To adjust the focus:
1. Go to Settings > Image > Focus and click Show AF area.
2. Adjust the autofocus area to cover the part of the image that you want to be in focus.
If you don't select an autofocus area, the camera focuses on the entire scene. We recommend that you focus on a
static object.
3. Click Autofocus.
4. To fine tune the focus, use the focus slider.
Select exposure mode
There are different exposure mode options in the camera that adjusts aperture, shutter speed, and gain to improve image quality for
specific surveillance scenes. Go to Settings > Image > Exposure and select between the following exposure modes:
• For most use cases, select Automatic exposure.
Optimize IR illumination
Depending on the installation environment and the conditions around the camera, for example external light sources in the scene,
you can sometimes improve the IR illumination if you manually adjust the intensity of the LED's.
1. Go to Settings > Image > Day and night, and turn on Allow illumination.
2. Turn on Live view control.
3. Minimize Settings.
4. In the live view control bar, click the Illumination button, turn on IR light and select Manual.
5. Adjust the intensity.
.
6