Page 1
WE-EF LEUCHTEN Installation and Maintenance Instructions Inground Luminaire ETC320-FS LED EVC320-FS LED...
Page 2
Inground Luminaire ETC320-FS EVC320-FS IP67, Class I, ta = 25C...
Page 3
Light Source Maintenance Apart from cleaning the outside of the luminaire, no special maintenance is necessary. Luminaire should be discarded in case the supply cable is damaged.
Installation Installation Methods The product must be installed and maintained by a Important: The luminaire is factory-sealed and does suitably qualifi ed person in compliance with the latest not need to be opened during installation. applicable regulations and relevant legislation. Ensure that proper drainage is provided for the shown When selecting the correct location for the luminaire, installation methods.
Page 5
Phase One Phase Two Blockout Installation Procedure Luminaire Installation and Electrical Connection (during earth or masonry work) 4) Switch off mains electrical supply. 1) A suitable recess to be provided to accommodate 5) Check that rating shown on luminaire label con- installation blockout/mounting ring assembly B/M.