Table of Contents
Advertisement
Relay Output
Exhaust Relay
(DOUT 1)
Manual Relay 1:
Manual Position
Relay 1 Status:
Analog Output 1
Fan Speed
(AOUT 1)
Mode:
Auto
Manual Value
0.00vdc
Output:
0.00vdc
C.
Service
e. Service Settings
c. Sensor Calibration
Analog Input
Fan Speed (AIN1)
Input B01
Offset
Value
100.0
C.
Service
e. Service Settings
d. User Save/Restore
User Save/Restore
Save?
Restore?
Enable Auto Save:
C.
Service
e. Service Settings
e. Alarm History Reset
Alarm History Reset
This will clear the
alarm history.
Continue?
NO
D.
Manufacturer
®
Manual Relay: Allows the user to override the relay output for troubleshooting.
Manual Position: The value to force the output to when in an override state.
Status: The current value of the relay output.
OFF
OFF
OFF
Mode: Allows the user to override the analog output for troubleshooting.
Manual Value: The value to force the output to when in an override state.
Output: The current value of the analog output.
i
Sensor Calibration,
n
inPUts oFFsEts
Offset: This adjustable value can be used to calibrate the input with an offset
value. (Factory Default = 0.0)
Value: This is the current value of the input. (Offset adjustment is added).
Similar screens are available for the remaining analog inputs.
0.0
User Save/Restore
i
n
dEFaUlt ParamEtErs storEd in mEmory
If the user would like to save their settings, move the cursor to the SAVE position
and change to YES. This will save all of the current parameters into memory as
Service Settings. If the user would like to restore to these values at some point
in the future, moving the cursor to the RESTORE position and selecting ON, will
No
restore the controller to the user-saved defaults.
No
Yes
t
his sCrEEn allows thE UsEr to
If the user would like to clear the alarm log, move the cursor to the OFF position
and change to YES.
The Manufacturer menu allows the user to access several sub-menus regarding
controller configuration, I/O configuration, factory settings, controller initialization
pages, and factory save/restore pages. These changes are to be completed under
factory advisement only!
thE UsEr will bE ablE to adjUst analog
.
,
modE
thE UsEr will bE ablE to savE and rEstorE thE
ClEar
Grease Trapper ESP™ Kitchen Exhaust Pollution Control System
.
thE alarm From mEmory
.
21
Advertisement
Table of Contents
