Table of Contents
Advertisement
C.
Service
e. Service Settings
a. Fan Operation
b. I/O Manual Control
c. Sensor Calibration
d. User Save/Restore
e. Alarm History Reset
C.
Service
e. Service Settings
a. Fan Operation
Auto Fan Off Settings
Auto Fan Off?
No
Run Hours:
8 hours
Note: This will only shut the
fan off if the fan was powered
on by the keypad (NOT DI)
Fan Scheduling
Fan On: NO
8:00am
Fan Off: NO
10:00pm
Days/Week
Mo Tu Wd Th Fr Sa Su
C.
Service
e. Service Settings
b. I/O Manual Control
Analog Input
PS1 Status (AIN 2)
Manual Control
B002:OFF
Manual Position
0.0
Value
2.50vdc
Digital Input
On / Off (DIN 1)
Manual DI
1:
OFF
Manual Position:
CLOSED
DI
1 Status:
Open
20
Grease Trapper ESP™ Kitchen Exhaust Pollution Control System
The Service Settings sub-menu allows the user to adjust fan operation settings,
set a fan on/off schedule, manually enable/disable input and outputs, calibrate
sensors, create or restore user settings and the alarm history log.
The Fan Operation sub-menu allows the user to adjust fan settings.
t
his sCrEEn allows thE UsEr to adjUst sEttings rEgarding thE aUto oFF
FEatUrE whiCh stoPs thE Fan iF startEd From thE UsEr intErFaCE aFtEr a
sPECiFiC amoUnt oF timE
Auto Fan Off?: Enable or disable the auto fan off feature. (Default is No).
Run Hours: Adjust fan run time before the fan automatically shuts off. (Default =
8 hours).
t
his sCrEEn allows thE UsEr to sEt a Fan on
Fan On: Enable or disable the fan turning on at a specific time. Time can be
adjusted below for fan on setting. (Default is NO, with 8:00am start time).
Fan Off: Enable or disable the fan turning off at a specific time. Time can be
adjusted below for fan off setting. (Default is NO, with 10:00pm start time).
Days/Week: Adjust which days per week the auto wash should occur. Black
(filled in) boxes indicate enabled for that day, white (open) boxes indicate disabled
for that day.
I/O Manual Control,
i
n
thE UsEr will bE ablE to adjUst inPUts
NOTE: The manual adjustment of these input and/or outputs should only be
adjusted in the event of troubleshooting. We suggest these parameters only be
changed with the advice of factory personnel.
Manual Control: Allows the user to override the analog input for troubleshooting.
Manual Position: The value to force the input to when in an override state.
Value: The current value of the analog input.
Manual DI: Allows the user to override the digital input for troubleshooting.
Manual Position: The value to force the input to when in an override state.
Status: The current value of the digital input.
.
/
oFF sChEdUlE For thE wEEk
.
/
.
oUtPUts
®
Advertisement
Table of Contents
