nedis HPBT5053BK Quick Start Manual page 6

Pairing the earphones to a Bluetooth audio
source
1. Take the earphones out of the charging case. The earphones
switch on automatically.
4 Press and hold both earphone buttons A
second to switch the earphones on manually.
4
If the earphones are not paired within 3 minutes, they
switch off.
9
2. A
blinks red and blue to indicate pairing mode is active.
3. Enable Bluetooth on the device you want to pair the
earphones with.
4. Select "HPBT5053BK" from the list of available Bluetooth
devices on your device.
Charging the product
1. Plug the micro USB cable A
7
A
.
2. Plug the other end of A
adapter.
3. Plug the power adapter into a power outlet.
4 The charging indicator LEDs A
progress of the battery.
4. Place the earphones into the respective slots A
close the lid A
5. The status indicator LED A
earphones are fully charged.
4
The earphones and the charging case can charge
simultaneously.
4
You can also charge the earphones using the battery cable
4
A as shown in image B. This allows you to use the
product while charging.
Switching off the earphones
Tap and hold A
product off.
Making phone calls
With the earphones connected to a mobile phone via
Bluetooth, phone calls will automatically be redirected to the
earphones.
• To answer an incoming call, press A
• To reject an incoming call, press and hold A
second.
• To end a call, press A
6
1
to charge the earphones.
q w
and A
for 5 seconds to switch the
q
or A
6
into the micro USB port
into a computer or power
8
indicate the charging
9
switches off when the
q
or A
w
.
6
q w
A
for 1
2 3
A
w
.
q w
or A
and
for 1