Table of Contents
Advertisement
Item #1001620687
Model #HD-2703-WH
HD-2703-BZ
USE AND CARE GUIDE
MOTION SECURITY LIGHT
Questions, problems, missing parts? Before returning to the store,
call Defiant Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-866-308-3976
HOMEDEPOT.COM
THANK YOU
We appreciate the trust and confidence you have placed in Defiant through the purchase of this motion security light.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing Defiant!
151209-IQA HD-2703-FA.indd 1
9/12/2015 10:18:34 AM
Advertisement
Table of Contents
Related Manuals for Defiant HD-2703-WH
Summary of Contents for Defiant HD-2703-WH
- Page 1 THANK YOU We appreciate the trust and confidence you have placed in Defiant through the purchase of this motion security light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
-
Page 2: Table Of Contents
Table of Contents Table of Contents ........2 Tools Required ........3 Safety Information ........2 Hardware Included .........4 Precautions Package Contents ........5 Warranty ............2 Mounting Location .........5 5-Year Warranty ........2 Installation ..........6 Specifications ..........3 Operation ...........7 Pre-Installation ..........3 Care and Cleaning ........10 Planning Installation ......3 Troubleshooting ........10 Safety Information... -
Page 3: Warranty
Warranty 5-YEAR WARRANTY Contact the Customer Service Team at 1-866-308-3976 or visit www.homedepot.com. Specifications Detection range Up to 70 ft. (21m) - Varies with surrounding temperature sensing angle Up to 270° Time delay 1, 5, or 10 minutes Hi-LO timer OFF, Dusk-to-Dawn, Seasonal adjusted timer mode Operating modes Auto, Manual, Eco, Smart... -
Page 4: Hardware Included
Pre-Installation (continued) HArdwAre iNclUded NOTE: Hardware shown not to scale M4 X 1.6” M4 X 1.9” Part description Quantity Wire connector Connector wire (black and white) Gasket Mounting bracket Mounting bracket screw 1 Mounting bracket screw 2 Mounting bracket screw (M4 X 1.6”) Mounting bracket screw (M4 X 1.9”) -
Page 5: Package Contents
Pre-Installation (continued) PAcKAge cONTeNTs Part description Quantity Main body Lamp head PIR lens MOUNTiNg lOcATiONs □ Determine the mounting location - a wall or under an eave. □ Position lamp head (B) in the general direction of the desired light coverage and tighten the screws (3) if needed. -
Page 6: Installation
Installation installing the Mounting Bracket WARNING: Turn the power off at the circuit breaker or NOTE: Firmly pull on the mounting bracket to verify it is fuse. Place tape over the circuit breaker switch and verify securely mounted to the junction box. If necessary, use the power is off at the light fixture. -
Page 7: Operation
Installation (continued) Mounting the light Fixture □ Plug the connector (BB) into the connector on NOTE: Make sure all the wires are inside the junction box the back of the fixture (A). before attaching the main body (A) to the junction box. □... - Page 8 Operation (continued) setting the sensor for Testing sensor Head Adjustment □ □ Rotate the motion sensor (C) so the controls Turn on power. Conduct a walk test to adjust face toward the ground. the sensor coverage area. Sensor will be in TEST mode automatically for 2 minutes.
- Page 9 Operation (continued) Adjust the dusk learn Adjusting the Time ECO mode: If desired, you can set the level of darkness at □ Motion sensor lighting is set to minimize which the sensor becomes active and at which the power usage. Lights turn on with motion for Hi-Lo feature comes on in the “Lo”...
-
Page 10: Care And Cleaning
Care and Cleaning □ To prolong the original appearance, clean with clear water and soft, damp cloth only. □ Do not use paints, solvents, or other chemicals on this light fixture. They could cause a premature deterioration of the finish. This is not a defect in the finish and will not be covered by the warranty. □... - Page 11 Troubleshooting (continued) Problem Possible cause solution □ □ The lights stay on A lamp is positioned too close to the motion Reposition the lamp continuously. sensor or pointed at nearby objects that away from the motion cause heat to trigger the motion sensor. sensor or nearby objects.
- Page 12 Questions, problems, missing parts? Before returning to the store, call Defiant Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-866-308-3976 HOMEDEPOT.COM Retain this manual for future use. 151209-IQA HD-2703-FA.indd 12 9/12/2015 10:18:37 AM...
Need help?
Do you have a question about the HD-2703-WH and is the answer not in the manual?
Questions and answers