Page 1
THANK YOU We appreciate the trust and confidence you have placed in Defiant through the purchase of this motion security light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of...
Table of Contents Tools Required ........3 Table of Contents ........2 Hardware Included .........4 Safety Information ........2 Package Contents ........4 Warranty ...........2 Installation ..........5 5-Year Limited Warranty ......2 Operation...........6 Pre-Installation .........3 Care and Cleaning ........7 Planning Installation ......3 Troubleshooting ........8 Specifications ........3 Safety Information PRECAUTIONS WARNING: Turn the power off at the circuit breaker or...
Pre-Installation PLANNING INSTALLATION Before installing the light fixture, ensure that all parts are present. Compare parts with the Hardware Included and Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this light fixture.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware shown to actual size. Part Description Quantity Wire connector Mounting screw Mounting screw PACKAGE CONTENTS Part Description Quantity Lamp head Light fixture Motion sensor...
Installation Determining the mounting location NOTE: The light fixture should be mounted approximately 8 ft. (2.4 m) above the ground. If the light fixture is mounted higher than recommended, aiming the sensor down will reduce the coverage area. Wall Mount □...
Installation (continued) Caulking around the light Mounting the light fixture fixture □ Align the drilled holes on the light fixture (B) CAUTION: Failure to completely caulk around the light with the holes on the junction box. fixture could result in water seepage into the light fixture and/or junction box.
Operation (continued) Determining the motion sensor detection zone NOTE: The motion sensor is non-adjustable. It has a sensing angle of 180° and a range of approximately 40 ft. depending on the surrounding temperature. NOTE: The motion sensor will need to completely warm up (60 seconds) before beginning the setup process.
Troubleshooting Problem Possible Cause Solution □ □ The light will not come on. The light switch is turned off. Turn the light switch on. □ □ The fuse is blown or the circuit breaker Replace the fuse or turn the is turned off.
Page 9
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Page 10
Questions, problems, missing parts? Before returning to the store, call Defiant Customer Service 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-866-308-3976 HOMEDEPOT.CA Retain this manual for future use. 210350-01A...
Page 11
HOMEDEPOT.CA Merci! Nous apprécions que vous ayez fait confiance à Defiant en achetant ce luminaire de sécurité à détecteur de mouvement. Nous nous efforçons continuellement de créer des produits de qualité qui amélioreront votre résidence. Visitez-nous en ligne pour la gamme complète de nos produits destinés à répondre à vos besoins d’amélioration...
Avant l’installation PLANIFICATION DE L’INSTALLATION Assurez-vous d’avoir toutes les pièces avant d’installer ce luminaire. Comparez les pièces à ce qui est indiqué dans les sections Quincaillerie fournie et Contenu de l’emballage. S’il manque des pièces ou que l’une d’entre elles est endommagée, ne tentez pas d’assembler, d’installer ou d’utiliser ce luminaire.
Avant l’installation (suite) QUINCAILLERIE FOURNIE REMARQUE : Matériel illustré à la taille réelle. Pièce Description Quantité Serre-fils Vis de support de montage Vis de support de montage CONTENU DE L’EMBALLAGE Pièce Description Quantité Projecteur Luminaire Détecteur de mouvement...
Installation Détermination du lieu de l’installation REMARQUE : Ce luminaire devrait être installé à environ 8 pi (2,4 m) au-dessus du sol. Si le luminaire est installé à une hauteur supérieure à celle recommandée, la zone de couverture sera réduite au moment d’orienter le capteur vers le bas.
Installation (suite) Scellant d’étanchéité autour du Montage du luminaire luminaire □ Alignez les trous percés sur le luminaire (B) ATTENTION : Si ne pas calfeutrez complètement autour avec les trous de la boîte de jonction. du luminaire peut entraîner des infiltrations d’eau dans le luminaire et / ou la boîte de junction.
Utilisation (suite) Réglage de la zone de □ Arrêtez-vous, attendez que la lumière (B) détection des mouvements s’éteigne, puis recommencez à marcher. □ Continuez ainsi jusqu’à ce que vous ayez établi la zone de détection. REMARQUE : Le détecteur de mouvement n’est pas réglable.
Dépannage Problème Cause possible Solution □ □ L’éclairage ne s’allume pas. L’interrupteur est hors tension. Placez l’interrupteur en position □ □ Le fusible est grillé ou le disjoncteur Remplacez le fusible ou enclen- est déclenché. chez le disjoncteur. □ □ La photocellule est en fonction.
Page 19
Cet appareil est conforme aux exigences de la Partie 15 des Règles du FCC. Son utilisation est assujettie aux deux conditions suivantes : (1) cet appareil ne doit pas causer d’interférence nocive; (2) cet appareil doit accepter les interférences, y compris celles qui peuvent causer un fonctionnement non désiré. Avertissement : Toute modification apportée à...
Page 20
Questions, problèmes, pièces manquantes? Avant de retourner l’appareil au magasin, communiquez avec le service à la clientèle Defiant entre 8 h et 19 h, HNE, du lundi au vendredi ou entre 9 h et 18 h, HNE, le samedi. 1-866-308-3976 HOMEDEPOT.CA...
Need help?
Do you have a question about the CD-5998-BK-G and is the answer not in the manual?
Questions and answers