Leifheit Regulus PowerVac 2in1 Operating Instruction page 37

3. Proper use
• Please note that this product is only intended for household use. Leifheit provides no manufac-
turer warranty for commercial use.
• The device is only intended to vacuum dry floors or dry material. Do not use it to vacuum liquids,
sharp or pointed objects, hot or cold ashes, burning cigarettes, fine dust (e.g. flour or cement
dust).
• The device may not be used to vacuum on people or animals.
• Do not cover air intake or air outlet while using the appliance. Ensure that the openings are not
blocked or covered by disruptive objects.
• Only use the device with accessories and spare parts permitted by Leifheit.
Any use going beyond this is considered improper and can cause damage or injury. The manufactu-
rer is not liable for damages resulting from this; the user alone carries the risk for this.
4. Before first use
Setting up/Assembly
Put the upper part of the charger (18) on the lower part (19). Insert the coaxial power connector of
the charger (20) into the charging socket (22). Ensure there is sufficient distance from sources of
heat and moisture and place the charger on a solid and even surface. Connect the charger (21) to a
power outlet. Insert the tube of the floor cleaner head into the tube of the lower part of the device
until you hear it lock. Fold up the upper end of the handle of the handle part of the device. Shift the
handheld down with the suction opening into the suction opening of the handle part of the device
and press the handheld into the handle until it locks.
Charging the battery
The battery must be charged fully before first use.
• Please ensure that the handheld is locked securely into the base attachment and that the de-
vice is switched off before you charge the device.
• Insert the device into the charger. The On/Off button on the handheld (12) blinks once a second
as long as the device is charging. Once the battery is charged, the button light goes off and
subsequently blinks once a minute for 30 minutes.
• Store the device in the charge station if you are not using it.
Note: The battery may only be charged using the charger supplied. The charger is only to be used
together with the Leifheit battery vacuum cleaner. The battery unit can be removed/exchanged
with the device. Ensure that the battery unit is pushed into the handheld until it locks.
5. Application
Cleaning with the base attachment
• Remove the device before switching on from the charge station.
• The device is started or stopped by pressing the On/Off button. The symbol
after it is switched on. The vacuum functions starts and the cleaning brushes turn. The front LEDs
of the floor cleaner head will be lit when the device is switched on.
• Suction mode 1 is activated automatically when switched on. Use the Suction Mode button (2) to
change between suction modes. Use Suction Mode 1 for maximum battery life. Suction Mode 2 is
especially well suited for heavier dirt or to vacuum carpets. The symbol I/II (13) will be lit cons-
tantly if Suction Mode 2 is selected.
• The Regulus PowerVac 2in1 is equipped with especially soft rolls, making it particularly well sui-
ted for sensitive floors. Ensure that no pointed objects get stuck in the brushes or in the wheels,
as these could damage the floors.
(12) will be green
t
33