Step 5:
Assemble the front wall panels
Fix parts J3 and J5 (jamb) to parts S92 and S93 (sheeting) with self-tapping screws as per diagram below. NOTE:v All screws marked
with a cross should not be fixed at this stage. Make sure the small lip on the channel is always facing out. This ensures rain water
cannot build up inside your shed.
ROOF TOP EDGE
RIDGES FACING UP
ROOF TOP EDGE
26P
Fix parts 26P, 26N (top channels), 42A (jamb), 26L, 26M, and 23A (bottom channels) with self-tapping screws. Enhance the top
channels by applying part 66 (channel connector).
J3
J5
S93
66
42A
S93
26L
Note: Holes drilled in the edge of this
sheet are not a defect. They are there
to allow the door hinge rivets clearance
through this sheet.
S92
RIDGES FACING UP
26N
S92
23A
26L
26M
23A
26M
17