Advertisement
Assemble the roof panel
Step 4:
Place parts S16, S27 and S17 (sheeting) on your worktable and join together with self-tapping screws as per the diagram below.
ROOF TOP EDGE
S17
S27
S16
RIDGES FACING UP
Fix parts 26F, 26E, 26A and 26B (channels) using self-tapping screws as per the diagram below. Please ensure parts 26A and 26B are
attached to the side of sheeting which has pre-punched holes as per the diagram below. Make sure the small lip on the channel is
always facing out. This ensures rain water cannot build up inside your shed.
26E
66
26F
ROOF TOP EDGE
26B
66
26A
RIDGES FACING UP
Enhance the structural strength by applying part 66 (channel connector). Note that screws are applied to both sides of the connectors.
15
Advertisement
