Table of Contents
Advertisement
1) Select RS485's Baud Rate.
2) Edit the Event action message. You can configure the message by using a
template or by including an event attribute token.
3) Check the Message Example for an example of the actual message being sen
t.
4) Click the 'TEST' button to send the example message to the server and ch
eck whether it is received.
5) Click the 'APPLY' button at the bottom to save.
HQ +1 (919) 230-8700 | WEST COAST +1 (310) 222-8600
93
ganzsecurity.com ©2020 CBC AMERICAS All Rights Reserved
222
Advertisement
Table of Contents
