4) Input a Trigger preset name.
5) Select 'Video Source'.
6) Select the discovery target class.
It is possible to select multiple objects for detection.
The detection target may vary depending on the algorithm setting of the
selected 'Video Source'.
7) Set Direction.
'forward'–Detects the direction of the green arrow.
'reverse'– Detects the direction of the purple arrow.
'both'-Detects both directions.
8) Show additional settings when you check for the 'Advanced Setup'.
HQ +1 (919) 230-8700 | WEST COAST +1 (310) 222-8600
65
ganzsecurity.com ©2020 CBC AMERICAS All Rights Reserved
222