Table of Contents
Advertisement
12) It will ignore objects that are not moving if the Ignore Static Object
is enabled.
(An event may occur if there is no movement and then you move again.)
13) Set ROI zone
Move the entire ROI by dragging its zone.
Move the edge by dragging the edge of the ROI.
Click on the line of the ROI to create a new edge.
Right click the edge of ROI to delete the edge.
14) Drag the Widget rectangle in the upper right corner to set where the wi
dget will appear.
HQ +1 (919) 230-8700 | WEST COAST +1 (310) 222-8600
43
ganzsecurity.com ©2020 CBC AMERICAS All Rights Reserved
Advertisement
Table of Contents
