Table of Contents
Advertisement
4) Input a Trigger preset name.
5) Select 'Video Source'.
6) Select the discovery target class.
It is possible to select multiple objects for detection.
The detection target may vary depending on the algorithm setting of the
selected 'Video Source'.
7) Set the 'Dwell Time'. Triggered when detection target stays longer tha
n set time.
8) Show additional settings when you check for the 'Advanced Setup'.
HQ +1 (919) 230-8700 | WEST COAST +1 (310) 222-8600
50
ganzsecurity.com ©2020 CBC AMERICAS All Rights Reserved
Advertisement
Table of Contents
