Table of Contents
Advertisement
15) Click the 'APPLY' button at the bottom to save.
16) The Widget will display properly if the trigger is added.
17) After confirming the settings, click the 'CLOSE' button at the bottom
to check
● Occupancy
Occupancy is an item that is triggered when you set an area on the screen and
the number of detection targets in the area is out of the specified range. For
example, an alarm can be triggered if a car that must be parked in a designate
d area has disappeared, or if more than two people are entering an area that c
an only accommodate two people.
[Caution] The determination of whether an object is inside a section is based
on the center coordinates of the object.
the list.
HQ +1 (919) 230-8700 | WEST COAST +1 (310) 222-8600
44
ganzsecurity.com ©2020 CBC AMERICAS All Rights Reserved
Advertisement
Table of Contents
