Table of Contents

Advertisement

Quick Links

CBC (America) Corp.
Megapixel Cameras and MP100 Surveillance Video Server System Software
USER MANUAL
Rev 5.0.4
Dec. 27, 2007
MP100 SOFTWARE IS PROVIDED ON AS-IS BASIS. CBC (AMERICA) CORP
DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT
SHALL CBC (AMERICA) BE LIABLE FOR ANY SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
NEGLIGENCE OR OTHER TORTUOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Advertisement

Table of Contents
loading

Summary of Contents for CBC MP3

  • Page 1 USER MANUAL Rev 5.0.4 Dec. 27, 2007 MP100 SOFTWARE IS PROVIDED ON AS-IS BASIS. CBC (AMERICA) CORP DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL CBC (AMERICA) BE LIABLE FOR ANY SPECIAL, INDIRECT OR...
  • Page 2: Table Of Contents

    Software installation.................... 9 Configure Firewall....................9 MP Application Manager.................14 Camera Installer....................14 Basic Mode......................15 Advanced Mode ....................15 Operating CBC America Video System MP100 ........18 Toolbar……………………………………………………………………..19 Selecting Full / Reduced Resolution and Zoom ........20 Settings…………………………………………………………………...23 Exposure………………………………………………………………………...24 Single Capture .....................25 Image Quality .......................28 Archive………………….
  • Page 3 Camera Web Page .....................47 HTTP JPEG Image Request Format............48 HTTP MJPEG Image Stream Request Format........49 Basic Camera Control Parameters .............50 Parameters Specific to MP3-DN DAY/NIGHT Cameras.....53 Motion Detection Control Parameters............54 Access Control ....................56 HTTP/1.1 vs. HTTP/1.0 ...................57 HTTP Access of Panoramic Cameras............58 Requesting Images from Camera..............59...
  • Page 4: Chapter 1. Introduction

    CBC (America) cameras. To complement its line of Megapixel cameras, CBC (America) offers full-featured video surveillance software, MP100. A typical system consists of a number of cameras connected over the local or wide area network to server PC running MP100 software.
  • Page 5: System Requirements

    • Netgear ProSafe 24+2 Gigabit Switch with POE #FS726TP, 2 Gigabit output w/12 PoE, 100Base-TX, Street Price $300 www.netgear.com • Netgear ProSafe 24+4 Gigabit Switch with POE # FS728TP, 4 Gigabit output w/24 PoE, 100Base-TX, Street Price $400 www.netgear.com CBC (America) www.computarganz.com...
  • Page 6: Recommended Accessories

    (www.dell.com) • Samsung s 243T, 24 Inch LCD Display (www.samsung.com) MP3-DN requires a 3 window; all other cameras can use most any outdoor housing capable of accommodating the 3 width x 2-1/2 height, such as HWB-3 or GH-FWC24 CBC (America)
  • Page 7: Introduction

    1.3-megapixel (1280x1024) monochrome sensor, enabling the delivery of clear imagery at illumination levels as low as 0.01 lux. MP3-DN typically delivers 20 FPS in day mode and over 30 FPS in night mode. MP5 & MP5A are 5-megapixel resolution cameras. Their maximum resolution is 2592 by 1944.
  • Page 8: Connectors

    • LAN connector, accepting a network UTP or STP cable carrying 100 Base- T. The LAN connector also accepts Power-over-Ethernet (PoE) • Power terminals, accepting 12V-48V DC switching power supply or better • Optionally, a DC auto-iris connector. MP3-DN does not support auto-iris and does not have this connector Power Power for all MP cameras can be supplied as follows: •...
  • Page 9: Housing And Mounting

    USER MANUAL MP2, & MP3; 4.5 Watts for MP3-DN; 5 Watts for MP5; 6 Watts for MP8D; and 8 Watts for MP8P. Housing and Mounting All MP camera models feature a durable aluminum housing that minimizes fire hazards. The housing is not hermetically sealed. The ambient temperature should be maintained between 0ºC and 50ºC (32ºF to 122ºF).
  • Page 10: Using Manual Iris Lenses

    Monitoring Iris Status with CBC America Video System You can monitor the state of the iris in CBC America Video System Settings dialog. See Operating CBC America Video System for details.
  • Page 11: Supported Network Services

    • HTTP requests issued from IE Explorer or other applications Supported Network Services All MP cameras, namely MP1, MP2, MP3, MP3-DN, MP5, MP8D and MP8P, support TFTP and HTTP network protocols. TFTP protocol yields the highest frame rate. It is accessible to the user through manufacturer SDK which supports both Windows and Linux platforms.
  • Page 12: Chapter 2. Video Surveillance Software

    Right-click on this file named LocalMachine.exe , choose properties -> Compatibility -> Privilege Level and enable the Run this program as an administrator option. Setup process installs software and places a shortcut CBC America on the desktop and creates a group CBC America in the Start menu. Configure Firewall As you start MP applications, your PC may prompt you to permit access to the network.
  • Page 13 For newer version of Norton Internet Security ( Figure 3) , go to Set tings- >Personal Firewall (under Web Br owsing) and select Turn Off. Figure 3. Newer version of Norton Internet Security For McAfee Personal Firewall (Figure 4), click Grant Access. CBC (America) www.computarganz.com...
  • Page 14 1. Click the Windows Start button and select C ontr ol Panel>Windows firewall. 2. Windows Firewall settings dialog will appear. If the firewall is on , make sure Don t allow exceptions is unchecked ( Figure 5 ). CBC (America) www.computarganz.com...
  • Page 15 3. Click “Exceptions” tab. Make sure “AppManager”, “CameraLocalMachine” and “CameraInstaller” appear in the list of programs and services and have a checkmark next to them (Figure 6). If these applications are not in the list, click Add Program button. Figure 6. Exceptions Tab CBC (America) www.computarganz.com...
  • Page 16 USER MANUAL 4. Find “Camera Installer” in the list of programs and click Ok. Repeat same for “CBC America Video”. Figure 7. Add a program Click Ok to close the Windows Firewall dialog. CBC (America) www.computarganz.com...
  • Page 17: Mp Application Manager

    USER MANUAL CBC Application Manager Setup.exe places the shortcut to the CBC Application Manager on the user s Desktop. All programs and utilities comprising CBC America Video System can be accessed via CBC Application Manager. The standard selections include Camera Installer, Live Video System, and AVI Maker. The Firmware Loader can also be listed as shown below ( figure 8 ) if the FirmwareLoader.exe is placed in...
  • Page 18: Basic Mode

    In this mode the user can detect all MP cameras present on the local area network and choose one or more cameras to install. The installer has a mechanism to protect previously installed cameras (if any) from accidental changes. It also allows users to set IP address of the cameras either CBC (America) www.computarganz.com...
  • Page 19 TIP: Users are able to lock/unlock any previously installed cameras using the functions in the Adv anced Features group. This group is hidden by default, but users can click Show Advanced Features to make advanced features visible. CBC (America) www.computarganz.com...
  • Page 20 Save/ Exit ‒ Save the information of the installed cameras into a file LocalMachine.ini for CBC America Video System and export a plaintext list of cameras into a file CameraList.txt for third party software, then exit the Installer.
  • Page 21: Operating Cbc America Video System Mp100

    Operating CB C America Video System MP100 Note: CBC America Video System requires a license file for each of the installed MP cameras The license is tied to a unique camera s MAC address. The license files are located in the C:\Program Files\CBC America\license folder. However, for the evaluation purposes, MP100 will operate any one MP camera without a license.
  • Page 22: Toolbar

    Figure 11. Live video display Toolbar The toolbar of the CBC America Video System is located in the upper portion of the screen above the video display area. It contains the following icons: Turns on/off a drop-down list of the installed cameras. Individual cameras are disabled / enabled by left double-clicking on the camera number.
  • Page 23: Selecting Full / Reduced Resolution And Zoom

    Depending on the chosen screen layout and the actual number of the installed cameras, the unused sections of the layout will be filled with a watermark image of the CBC (America) camera. Displays the Archive controls (see Browsing Archives below).
  • Page 24 Panning of the zoomed area is performed by dragging the green outline across the underlying camera image with the mouse (by left-clicking within the outline and holding down the mouse button), or alternatively with the keyboard arrow keys. CBC (America) www.computarganz.com...
  • Page 25 A maximum of four independent live zoom windows can be opened per each camera. Each zoom window will display live video at full resolution. Note: the panoramic camera MP8D currently allows only one zoom window per channel. CBC (America) www.computarganz.com...
  • Page 26: Settings

    Figure 13. Setting menu Settings menu is the top level menu for all settings provided in the CBC America Video System. Selecting one of the menu items opens up a lower level drop- down menu containing detailed settings and options. Depending on the camera model, some of the listed groups of settings may become unavailable (for example, Day/Night settings are available only for the MP3-DN camera).
  • Page 27: Exposure

    Select Exp osure ( Figure 15 ) from the Setting menu to adjust exposure related settings: Illuminati on is a group of options to adjust camera s white balance • computation to the illumination of the scene. Automatic enables the camera to adjust for illumination automatically. CBC (America) www.computarganz.com...
  • Page 28: Single Capture

    MP1, MP2, and MP5. This work mode is designed for application scenarios where a single image is to be captured when an external event triggers the camera s auxiliary input. Possible application areas include license plate capturing, door control systems, photo booths, etc. CBC (America) www.computarganz.com...
  • Page 29 When MP100 software restarts, it automatically searches the ph ot o folder for a file named userinf o.txt which stores user defined information for a specific camera. Users can edit this file so that user-specific information can be added to the captured images. CBC (America) www.computarganz.com...
  • Page 30 USER MANUAL CBC (America) www.computarganz.com...
  • Page 31: Image Quality

    Note: affected by Don t update sensor window in Advanced settings. R ot a te 1 80 is an option for flipping the image vertically and horizontally such that it is rotated 180 degrees. CBC (America) www.computarganz.com...
  • Page 32: Archive

    Note: if new motion is detected during such after-motion recording, the rate of recording will revert to the one specified under Frequency . CBC (America) www.computarganz.com...
  • Page 33: Motion Detection

    The privacy mask is marked with red crosses. A more complex shape can be created by drawing multiple rectangles. Erasing the mask (or part of the mask) is done by drawing a rectangle with the right mouse button. Figure 18. Image of motion detection CBC (America) www.computarganz.com...
  • Page 34: Save To

    (displayed in the lower left corner of Motion Settings). Save to A lower level Save to menu allows to specify the directory path for video archives and for snapshot images. Note that the name of archival directory CBC (America) www.computarganz.com...
  • Page 35: Advanced

    Enabling this option helps to avoid conflicts when multiple users are viewing the same camera (each will be able to set different image size). Alternatively, disabling this option allows to increase the camera frame rate due to a smaller image size. CBC (America) www.computarganz.com...
  • Page 36: Authentication

    Aut o ‒ S tartup is an option to automatically restart the CBC America Video System with the earlier settings after it was stopped. Rea lT ime if fol de d is an option to continue running the CBC America Video System application at the top priority level in the Windows Task Manager after the application was minimized and placed onto the system tray of the Windows task bar.
  • Page 37 USER MANUAL  Administrator grants full access to all features of CBC America Video System.  Viewer grants access to live video and browsing the archives, but not to the settings.  Live only grants access to live video only.
  • Page 38: Remote Viewing

    USER MANUAL Remote Viewing MP100 software has built-in web server allowing MP cameras and archives to be viewed remotely. ( Figure 22 ) Figure 22. Remote viewing menu CBC (America) www.computarganz.com...
  • Page 39 2. On the bottom of the menu click Appl y then Ok 3. Start Internet Explorer and type in the address of the web server. For example, if the CBC America Video System is installed on a PC with an IP address of 200.168.1.102, type in the following address: http://200.168.1.102:4250/guix.htm...
  • Page 40: Day/Night

    USER MANUAL Day/Night Day/Night ( Figure 23 ) settings apply only to MP3-DN camera including: Figure 23. Day/Night setting menu Aut oma ti c enables camera automatically switch from daylight conditions (using the color sensor) to nighttime conditions (using monochrome sensor), and back based on the Threshold settings.
  • Page 41 The state of the auto-iris is displayed on a color panel which has six different states: Disabled : The auto-iris is either disabled by un-checking the Enabled • check box, or is not present. Evaluating : The camera is preparing to close the iris. • CBC (America) www.computarganz.com...
  • Page 42: Right-Click Menu

    Right-Click Menu Right-clicking anywhere within the CBC America Video System screen brings up an additional menu ( Figure 25 ): Figure 25. Additional menu within CBC America Video System screen.
  • Page 43 Log off logs off the current user. Exit exits the CBC America Video System application. Ab out shows the version of the CBC America Video System software and additional information for each of the installed camera(s): version of firmware, MAC address, and IP address.
  • Page 44: Language Selection

    USER MANUAL Language Selection CBC America Live Video System supports interfaces in Arabic, Chinese Simplified, Chinese Traditional, English, Finnish, German, Japanese, Spanish, Russian and other languages. To select language press the F2 button to bring up the language menu ( Figure 26 ).
  • Page 45 To take a snapshot from the archive use button from the Toolbar. Alternatively, snapshots can be taken by right-clicking on the video image, and then selecting photo , save . CBC (America) www.computarganz.com...
  • Page 46: Avi Maker - Making Video Clips From The Archive

    USER MANUAL AVI Maker - Making video clips from the archive The AVI Maker ( Figure 28 ) is started by clicking the corresponding Run button in the CBC Application Manager. Figure 28. AVI Maker NOTE: PLEASE MAKE SURE THAT THE ARCHIVE IS NOT EMPTY WHEN MAKING AVI CLIPS.
  • Page 47 XviD ‒ http://www.koepi.org/xvid.shtml codec recommended by CBC America (it is included in the MP Software Setup, and is typically installed during the CBC America software installation). This codec has been found to produce very good quality and compression of resulting AVI files.
  • Page 48: Firmware Loader - Upgrading The Cameras

    : IT IS RECOMMENDED THAT THE USER RUNS MP CAMERA INSTALLER IMMEDIATELY PRIOR TO RUNNING THE FIRMWARE LOADER. The MP Firmware Loader is started by clicking the corresponding Run button in the CBC Application Manager, if the MP Firmware Loader was installed in the CBC America folder.
  • Page 49 MP camera. When the upgrade is complete Success! message will be displayed with the new revision of hardware. IMPORTANT: DISCO N N ECTI NG T HE POW ER TO THE CAMERA DURI NG THE UPGRADE WILL RE S U LT IN PERMANE NT DAMAGE TO THE CAMERA. CBC (America) www.computarganz.com...
  • Page 50: Chapter 3. Http Access

    Non-Panoramic Cameras This chapter describes the HTTP access of CBC (America) cameras MP1, MP2, MP3, MP3-DN, and MP5. HTTP access of panoramic cameras MP8D and MP8P are described in the next chapter. CBC (America) cameras support two protocols, TFTP and HTTP. TFTP protocol is recommended for application scenarios where high quality video at full frame rate is preferred.
  • Page 51: Http Jpeg Image Request Format

    IMPORTANT: COMPLETE SET OF HTTP REQUESTS DESCRIBED IN THIS DOCUMENT IS SUPPORTED FOR FIRMWARE VERSIONS 61430 AND ABOVE. IF YOU HAVE MP CAMERA WITH LOWER FIRMWARE VERSION CONTACT CBC (America) Corp. FOR A FIRMWARE UPGRADE. The individual image can be requested from MP cameras by using the following HTTP request format: HTTP://ip_address/image?res=resolution_value&x0=X0&y0=Y0&x1=X1&y1=Y1...
  • Page 52: Http Mjpeg Image Stream Request Format

    (useful for picture-in-picture display). • fps specifies the requested frame rate; values 1 to 15 result in the specified frame rate, while omitting fps parameter as well as fps values of CBC (America) www.computarganz.com...
  • Page 53: Basic Camera Control Parameters

    HTTP/1.0 200 Ok\r\n Content-Type: multipart/x-mixed-replace;boundary=fbdr\r\n \r\n --fbdr\r\n Content-Type: image/jpeg\r\n \r\n <JPEG image 1 data> \r\n --fbdr\r\n Content-Type: image/jpeg\r\n \r\n <JPEG image 2 data> \r\n --fbdr\r\n Content-Type: image/jpeg\r\n \r\n <JPEG image n data> \r\n --fbdr\r\n Basic Camera Control Parameters CBC (America) www.computarganz.com...
  • Page 54 • expwndheight ‒ height of user-defined auto-exposure measurement window (valid values should fall within sensor window) • sensorleft - left coordinate of sensor window (valid values defined by sensor size) • sensortop - top coordinate of sensor window (valid values defined by sensor size) CBC (America) www.computarganz.com...
  • Page 55 • procversion ‒ retrieves version of the image processor • netversion ‒ retrieves version of the network processor • revision ‒ retrieves the revision code of the PCB • factory ‒ restores camera parameters to factory defaults http://ip_address/set?params=factory • access to camera registers: setreg?page=page_number&reg=register_number&val=register_value CBC (America) www.computarganz.com...
  • Page 56: Parameters Specific To Mp3-Dn Day/Night Cameras

    USER MANUAL Parameters Specific to MP3-DN DAY/NIGHT Cameras MP3-DN camera utilizes two distinct sensors for its day and night modes. Specifically, 3-Megapixel color sensor with IR-cut filter is used in the day mode, while 1.3-Megapixel monochrome sensor without IR-cut filter is used in the night mode.
  • Page 57: Motion Detection Control Parameters

    64. There are 8 rows of zones, 8 zones per row. Note that depending on zone size and the camera model (image resolution in terms of the number of pixels)some zones may not correspond to the active image area (valid value 64) CBC (America) www.computarganz.com...
  • Page 58 If more than this number of zones have motion it is assumed that the change is due to lighting change and detected motion is ignored; (recommended values are 40 for MP3-DN, 30 for MP2 and 20 for MP1). This parameter corresponds to Limit under Motion Settings in AV Video System GUI.
  • Page 59: Access Control

    1 there are 26 (32x32) sub-zones with motion, in zone 2 there is one sub-zone 1 with motion …. Access Control CBC (America) cameras support dual-level password-protected access control. Camera authentication is compatible with RFC-2068 HTTP 1.1 and is supported by all standard browsers and video surveillance software.
  • Page 60: Http/1.1 Vs. Http/1.0

    Figure 30. Camera s web page menu for setting the passwords HTTP/1.1 vs. HTTP/1.0 CBC (America) cameras support both HTTP/1.0 and HTTP/1.1 protocols as defined by RFC-1945 and RFC-2068, respectively. While HTTP/1.0 is simple, it limits the speed of image transmission for cases when the user requests individual images rather than MJPEG stream.
  • Page 61: Http Access Of Panoramic Cameras

    However, HTTP/1.0 is supported by all HTTP implementations and can be used reliably, albeit with limited speed. By default, CBC (America) cameras are configured to respond using HTTP/1.0 protocol regardless of the HTTP version used by the client.
  • Page 62: Requesting Images From Camera

    The channel number of the transmitted image could then be identified from the HTTP header Etag (see RFC-2068 HTTP 1.1): E T a g : Ch annel<channel> . CBC (America) www.computarganz.com...
  • Page 63: Getting And Setting Camera Parameters

    All commands listed below that allow parameter setting without explicitly specifying the channel number apply to all four channels. NOTE: Parameter setting is allowed only for the users with the a dm in access level (see below under Camera Access Control). CBC (America) www.computarganz.com...
  • Page 64 5. Saturation: http://camera_ip/get<channel>?saturation http://camera_ip/set<channel>?saturation=(0..6) 6. Blue balance: http://camera_ip/get<channel>?blue http://camera_ip/set<channel>?blue=(-10..+10) 7. Red balance: http://camera_ip/get<channel>?red http://camera_ip/set<channel>?red=(-10..+10) 8. Illumination: http://camera_ip/get<channel>?illum http://camera_ip/set<channel>?illum=("auto"¦"indoor"¦"outdoor"¦"mix") 9. Mains frequency, Hz (for indoor lighting compensation): http://camera_ip/get<channel>?freq http://camera_ip/set<channel>?freq=(50¦60) 10. Exposure mode (low light mode): http://camera_ip/get<channel>?lowlight http://camera_ip/set<channel>?lowlight=("highspeed"¦"speed"¦"balance"¦"qu ality"¦"moonlight") CBC (America) www.computarganz.com...
  • Page 65 15. Sensor cropping: http://camera_ip/get?sensorleft http://camera_ip/set?sensorleft=(0..max of the corresponding sensor size) http://camera_ip/get?sensortop http://camera_ip/set?sensortop=(0..max of the corresponding sensor size) http://camera_ip/get?sensorwidth http://camera_ip/set?sensorwidth=(0..max of the corresponding sensor size) CBC (America) www.computarganz.com...
  • Page 66 17. Getting MAC number: http://camera_ip/get?mac 18. Getting camera model: http://camera_ip/get?model 19. Getting firmware version: http://camera_ip/get?fwversion 20. Getting image processor engine version: http://camera_ip/get?procversion 21. Getting network processor version: http://camera_ip/get?netversion 22. Getting PCB revision http://camera_ip/get?revision CBC (America) www.computarganz.com...
  • Page 67 28. User password with viewer level of access: http://camera_ip/get?viewer http://camera_ip/set?viewer=( text string of 1..8 ASCII symbols ¦ empty ) NOTE: to erase the password use the reserved word empty . 29. Camera s register access: http://camera_ip/getreg?page=(0..6)&reg=(0..255) http://camera_ip/setreg?page=(0..6)&reg=(0..255)&value=(0..65535) CBC (America) www.computarganz.com...
  • Page 68: Access Control

    On-camera motion detection is currently not available on CBC (America) panoramic cameras. Future releases will have this feature incorporated. Users who have interest in this feature please visit CBC (America) website from time to time for latest updates and/or firmware upgrades.
  • Page 69: Chapter 4 Troubleshooting And Useful Tips

    • Under Image Quality menu decrease compression and increase sharpness. • Check if the lens iris is fully open or closed down too much. For best resolution and depth of field the iris (depending on lens make and model) should be closed by 2-3 F-stops. CBC (America) www.computarganz.com...
  • Page 70: Frequently Asked Questions

    You can obtain a license file by contacting (America) contacting CBC (America) Corp. 4. H ow do I change the l oca t i on of CBC (America) www.computarganz.com...
  • Page 71 USER MANUAL the Archi ve f ol der? The default destination of the Archive folder is C:\CBC (America) Storage. The location of the archive can be changed using Save to menu under Settings ( Figure 32 ). While the name of the archival directory should be the same for all cameras, the user has an option of specifying the Hard Drive for the archival on a camera-by-camera basis.
  • Page 72 In the Windows Firewall window ( Figure 33 ), click the Excepti ons tab and add Megapixel Camera programs (CameraInstaller, CameraManager, and CBC Video System) to the list of exceptions. Once the selections have been made click OK, and re-run the Camera Installer. If the Camera Installer still can not find the camera make sure that there are no hardware firewalls in the gateways and routers on your network.
  • Page 73 There are three types of updates. One update will update the MP1, MP2, and MP5. The MP3-DN has its own update and it should only be used for the MP3-DN. The MP8D and MP8P have their own update; it should only be used for the MP8D and MP8P.
  • Page 74 USER MANUAL CBC (America) cameras are supported by many third-party software packages, including our own ZNS-NVR software package which can incorporate other IP cameras. Contact CBC (America) Corp. for an updated list. Current NVR Partners: Bosch ‒ www.boschsecurity.com(DiBos 8) D3DATA ‒...
  • Page 75 The user may also want to consider going with the camera equipped with auto-iris lens - the lens will open automatically as illumination diminishes. If that is CBC (America) www.computarganz.com...
  • Page 76 5-mega pixel product, MP5. If that still does not yield sufficient low-light performance then, the user should consider MP3-DN day-night camera that uses monochrome sensor in low light conditions and is sensitive to 0.01 lux .
  • Page 77 Motorized zoom is not supported by the camera, but you can mount the external PTZ unit with independent controls. 19 . How d o I access the CBC (America) WEB camera home pa ge t o view my cameras remotel y .
  • Page 78 25 . How d o the CBC (America) cameras utilize PTZ (Pan, Til t , Z o om)? There is no mechanical PTZ. However MP cameras have multi-megapixel resolution and allow instantaneous electronic pan, tilt and zoom by specifying PTZ window coordinates.
  • Page 79 27 . What is the night performance (Lux) of the MP3-DN camera? In low-light conditions MP3-DN switches to 1.3 megapixel monochrome sensor resulting in good image quality down to 0.01 Lux MP3-DN is also sensitive to near-infrared illumination ‒ allowing the use of standard infrared illuminators as the light source.
  • Page 80 Resetting the MP camera to its original configuration can be achieved through the built-in web server. To reset the MP camera open IE explorer and type as http://ip_address/set?params=factory. Replace ip_address with the actual camera IP address. CBC (America) www.computarganz.com...
  • Page 81: Chap T Er 5 . Re G Ul A Tory Complianc

    Purchaser, including Purchaser s purchase order. ANY ADDITIONAL, DIFFERENT OR CONFLICTING TERMS AND CONDITIONS HEREBY ARE OBJECTED TO BY CBC (AMERICA), LLC ( CBCA ), AND SHALL BE OF NO FORCE AND EFFECT. No waiver or...
  • Page 82 Product returned to CBCA for non-compliance with this Limited Warranty shall returned accordance with Rejection/Return provisions below. Any refund shall be equal to the actual purchase price for the applicable Product. IN NO EVENT SHALL CBCA BE LIABLE TO PURCHASER FOR ANY INDIRECT, INCIDENTAL, CBC (America) www.computarganz.com...
  • Page 83 Purchaser twenty (20) business days after receipt unless Purchaser rejects such Product within such twenty (20) business day period for failure to comply with the Limited Warranty set forth in above. Upon such rejection, Purchaser shall immediately notify CBCA of the rejection and shall, at CBC (America) www.computarganz.com...
  • Page 84 Purchaser may not assign its rights or delegate its obligations hereunder without the express written consent of CBCA. Any assignment by Purchaser without such consent shall constitute a breach hereof by Purchaser. CBC (America) www.computarganz.com...

This manual is also suitable for:

Mp1Mp2Mp2aMp5Mp5aMp8d ... Show all

Table of Contents