Table of Contents
Advertisement
14) Click the 'APPLY' button at the bottom to save.
15) The Widget will display properly if the trigger is added.
16) After confirming the settings, click the 'CLOSE' button at the bottom
to check
● Enter/Exit
Enter/Exit is a function that is triggered when the detection target enters or
exits based on the boundary of the area on the ROI set zone on the screen. ([C
aution] Judging whether an object has entered the zone is based on when the ob
ject's center coordinates span the boundary line. The center coordinates can b
e seen by activating the Object Trajectory option in the DISPLAY-> OSD item.)
the list.
HQ +1 (919) 230-8700 | WEST COAST +1 (310) 222-8600
58
ganzsecurity.com ©2020 CBC AMERICAS All Rights Reserved
222
Advertisement
Table of Contents
