Bimodal pairing with wireless accessories
You can stream to your Nucleus 7 Sound Processor and ReSound hearing aid from a ReSound Multi Mic, Cochlear
Mini Microphone 2/2+, ReSound TV Streamer 2 or Cochlear TV Streamer.
Non-rechargeable
2
5
1
sec
Rechargeable
1
Turn off ReSound
hearing aid and Nucleus 7
Sound Processor.
You can now begin streaming to one
5
or both hearing devices.
Note: Streaming must be started and
stopped on each device individually.
3
sec
Rechargeable
8
ReSound hearing aid
Press and hold the push button on your
ReSound hearing aid.
# For more information refer to the Apple Accessibility Quick Guide.
Turn on microphone.
2
Note: Ensure microphone is
charged.
Plug power and audio cables into
2
TV streamer and connect to audio
source. Turn on TV streamer.
Nucleus 7 Sound Processor
6
Press and hold the button on your
sound processor for 2 seconds, then
release
the button.
3
sec
Non-rechargeable
9
ReSound Remote Control 2 (optional)
Press the streaming button on this
remote control.
Microphone
Press the pairing button once
3
for channel 1, twice for channel
2, three times for channel 3.
Note: The LED will blink orange
for 20 seconds while device is in
pairing mode.
or
TV Streamer
Press pairing button.
3
Note: The LED will blink orange for
20 seconds while device is in pairing
mode.
2
sec
Non-rechargeable
5
sec
Rechargeable
4
Turn on your hearing
aid and then turn on
your sound processor.
Note: The LED will
flash blue to show
pairing was successful.
Cochlear CR310 Remote Control
7
Press and hold the Telecoil button for
2 seconds, then release.
10
Streaming to both ears
Through Apple's accessibility menu
you can control streaming to both
the sound processor and hearing aid.
Triple click the home button to access
controls for turning on a streaming
source and to adjust volume.
2
1
#
Need help?
Do you have a question about the Nucleus 7 and is the answer not in the manual?
Questions and answers