Cochlear Nucleus 7 Manual page 3

Smart bimodal pairing with an Android
You can stream sound simultaneously to your Nucleus
from a compatible Android device
Important: your clinician must link your hearing devices and assign your hearing aid to the correct ear before you
can pair to your Android device.
ReSound hearing aid
To pair with a compatible Android device you will need the ReSound Smart 3D
firmware version 10042.4200 or later. You can find your firmware version in the Smart 3D app by selecting My ReSound, then
Hearing aid software updates.
New users of the ReSound Smart 3D app
Open the app and select
1
'Get Started'.
Turn hearing aid 'OFF'
5
and 'ON'.
Existing users of the ReSound Smart 3D app v. 1.5.0
If you are already using ReSound Smart 3D v. 1.5.0 with a paired Android device when your phone manufacturer enables
the enables the Audio Streaming for Hearing Aids (ASHA) functionality, follow these steps.
Swipe down from the top on
1
the screen to open the
Settings menu, then hold the
Bluetooth icon for 2 seconds.
* For compatibility information and devices visit cochlear.com/compatibility and resound.com/compatibility
. Each hearing device should be individually paired for Android streaming.
*
Review and agree to the
2
Terms and Conditions.
The app will identify your
6
hearing aid.
Hold the settings icon for
2
'ASHA's Hearing Aids' for
2 seconds.
device
™
7 Sound Processor and compatible ReSound hearing aid
®
app version 1.5.0 or higher and ReSound
™
Enable location services.
3
Restart your hearing aid
7
(if rechargeable press button
for 5 seconds).
Select 'Forget' .
3
Enable Bluetooth.
4
Tap 'Continue' .
8
Your hearing aid is now paired
and ready to stream.
Open the 'More' menu
4
and select 'Pair new hearing
aids' , then go to step 5 in the
instructions above for New
users of the ReSound Smart
3D app.