Normstahl EasyLift 500 Translation Of The Original Operating Manual page 29

EN
Translation of the German original declaration
We,
Entrematic Sweden AB
Gamla Flygplatsvägen 2-4
SE 42321 Torslanda
hereby declare that we have applied and complied with the following basic requirements of the EC Directive 2006/42/EC in the
design and manufacture of the partially completed machinery described below: 1.1.2, 1.1.3, 1.2.1, 1.2.3, 1.2.4, 1.2.6, 1.3.2,
1.3.4, 1.5.1, 1.5.2, 1.5.3, 1.5.8, 1.5.9, 1.5.10, 1.5.11, 1.6.3, 1.7.3, 1.7.4
The special technical documents have been compiled in accordance with Appendix VII Part B of the EC Directive 2006/42/EC.
Description of the partially completed machinery
Function Electrical garage door operator with wireless remote control
Model EasyLift 500 / Sesam 600
Harmonised standards applied
DIN EN ISO 12100-1:2004-04
DIN EN ISO 12100-2/A1:2009-10
DIN EN ISO 13849-1:2008-12
DIN EN 13241-1:2004-04
Other applied directives / standards
Construction Products Directive 89/106/EEC
EMC Directive 2004/108/EC
EN 55014-1:2006 + A1:2009
EN 55014-2:1997 + A1:2001 + A2:2008
EN 60335-1+A1+A11+A12+A2+A13
EN 301 489-1/-3
EN 60950-1+A1
The partially completed machinery may not be put into operation until it has been determined that the machinery into which the
partially completed machinery is to be installed complies with the regulations of the Machinery Directive.
On demand we submit these technical documents to the market supervisory authorities within a reasonable time.
Mathias Buchhaas
Product Manager
Torslanda, 01.05.2012
EasyLift 500 / Sesam 600
Declaration of Incorporation
Safety of machinery – basic concepts, general principles for design – Part 1
Safety of machinery – basic concepts, general principles for design – Part 2
Safety of machinery – Safety-related parts of control systems - Part 1
Industrial, commercial and garage doors and gates – Product standard – Products
without fire resistance and smoke control characteristics
Low Voltage Directive 2006/95/EC
1999/5/EC R&TTE
EN 61000-3-2:2006 + A2:2009
EN 61000-3-3:2008
EN 60335-2-95
EN 300 220-1/-2
EN 50371
MA120527=>2012-05 29 / 56