Table Of Contents; Product Description; Symbols; Intended Application - Normstahl EasyLift 500 Translation Of The Original Operating Manual

Table of Contents

Advertisement

Available languages

Available languages

EN English
Translation of the German original operating manual

Table of contents

1 Introduction
1 Introduction
Read operating instructions carefully before installing and
commissioning. Pay attention to the illustrations and all notes.

2 Product Description

Packaging: Only reusable materials are used. Dispose of
packaging in an environmentally-friendly way and according
to local legal guidelines.
Scope of delivery see page 22

3 Symbols

The following symbols are used in this manual:
CAUTION Warns of potential injury and material
damage. Non-observance of instructions marked with
these symbols can result in serious injuries and material
damage.
NOTE: Important technical instructions that must be
observed.
EasyLift 500 / Sesam 600

4 Intended Application

This door operator is suitable for use in domestic garages.
Any other use is deemed incorrect.
This product must not be used in explosion-protected
atmospheres.
17
The manufacturer must provide written and express approval
17
for:
17
• Modifications or attachments
17
• Use of parts other than factory authorised replacement
17
parts
17
• Repairs performed by persons or businesses that have not
18
been authorised by the manufacturer.
18
If approval is not obtained for any of the above, this may
18
invalidate the product's guarantee.
We will not be liable for damage
18
• due to non-compliance with operating instructions
18
• due to technical errors in connecting the door operator and
18
structural deformations that may occur during operation
18
• as a result of inappropriate
18
door maintenance.
19
19

5 Informal Safety Measures

19
19
Keep the operating instructions handy for future use.
19
The inspection and testing log book provided must be filled
20
out by the person carrying out the installation and kept by the
operator along with all other documentation (door, door
20
operator).
20

6 Safety Instructions

20
General safety instructions
21
The door operator may only be used if the entire range
21
of motion is clearly visible. Be mindful of others within the
action range of this product during operation.
Always disconnect the electrical power before working on the
door operator.
Actions prohibited during use of a door operator:
• Passing or driving underneath a moving door
• Lifting of objects and/or persons with the door
• Children must not be left to operate the product
unsupervised; it is not a toy.
The door must only be operated when
• all users are familiar with its functions and operation.
• the door meets the requirements of European standards
EN 12604, EN 12605 and DIN EN 13241-1.
• the door operator is installed in compliance with the
relevant standards (EN 12453, EN 12445 and EN 12635).
• any optional safety devices such as a light barrier,
optosensor or safety edge are fully functional.
• garages without a second entrance have an emergency
lock release from the outside. It may be ordered separately
if necessary.
• an inset door in the garage door is closed and is equipped
with a safety device that prevents activation when the door
is open.
• an additional safety device (safety edge, etc.) has been
installed prior to activation of the automatic closure
function.
• If a person with restricted physical, sensory or mental
capacity, or a person with little experience and/or
knowledge of the door operator is to use the device, they
must be supervised by a person who assumes
responsibility for their safety.
MA120527=>2012-05
17 / 56

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sesam 600

Table of Contents