Advertisement
Available languages
Available languages
18. RECEIVE FILE DUMP
1) Press and hold RECORD.
2) Press 3rd FLASH KEY 3times, then release RECORD, when IN appears on display, it is
ready to receive file dump.
3) All other operations are void when receiving file dump. It will withdraw receiving file dump
automatically when receiving is over or mistakes is occurred. Power on after power off also
pause receiving file dump.
19. SEND FILE DUMP
1) Press and hold RECORD.
2) Press 4th FLASH KEY 3times, then release RECORD, when OUT appears on display, it is
ready to receive file dump.
3) All other operations are void when receiving file dump. It will withdraw sending file dump
automatically when sending is over or mistakes is occurred. Power on after power off also pause
receiving file dump.
20. DETAILED DESCRIPTION
1) FADE TIME: The period that output varies from full dimmer to zero or from zero dimmer to
full dimmer.
2) SINGLE MODE: SCENE program is executed one by one and the No. is showing on display.
Its speed is controlled by SPEED slider.
3) MIX MODE: ALL selected program are executed synchronously, each is allowed to have
respective chasing speed.
4) When CHASE
channel sliders. BLIND one of PRESET B channels ,the appropriate channel slider together
with MASTER A slider control its output, and the maximum dimmer of the program is
maintained unit you HOME the channel.
5) FADE TIME & SPEED TIME INDICATIONS
A: when time is more than 1minute, the indication includes two dots.
For example: 1minute past 15 second, indicate 1.15.
Half past 4minute, indicate 4.30
10 minute, indicate 10.0
B: when time is less than 1 minute, the indication has one dot only.
For example: 11.5 second, indicate 11.5
1.2second, indicate 1.2
0.55second, indicate 0.55
6) Transmit and receive file
A: open loop mode:
B: closed loop mode:
SCENES LED is lit, you can select scene program using PRESET B
18
Advertisement
