Advertisement
Available languages
Available languages
14. SPEED SLIDER:
15. FULL ON KEY:
BLACK OUT.
16. AUDIO LEVEL SLIDER: move to adjust the sensitivity of audio.
17. BLACK OUT KEY: the key will force all DMX to "0".
18. STEP KEY:
19. AUDIO KEY:
20. HOLD KEY:
21. PARK: IN CHASE
DOUBLE PRESET, pressing PARK B is same as MASTER B at the maximum. In SINGLE
PRESET, pressing PACK A is same as MASTER A at the maximum.
22. REC EXIT: exit record. When the LED is lighting, it is in KILL, press any one of all channel
FLASH and all output is zero except the one channel.
23. RECORD KEY: press it to record the step of program.
24. PAGE KEY: press it to select desired SCENE program in appropriate page.
25. MODE SELECT: by pressing the key you can select CHASE
SINGLE PRESET.
26. DARK KEY: press it to pause whole output, including FULL ON and FLASH.
27. ALL REV: the key, when activated will reverse chasing direction of all program.
28. 0 % OR 0-255 KEY: press it to select 0% or 0-255 on DISPLAY.
29. REV ONE: press and hold the key, then press any one of PRESET B .the SCENE program will
chase in reversed direction.
30. CHASE REV: the key will reversed the SCENE program chase direction controlled by slider of
speed.
31. BEAT REV: the key will reversed the SCENE program chase direction controlled by regular beat.
32. FOG MACHINE: the key will control fog machine.
1. POWER SWITCH.
2. POWER INPUT : DC 12V-18V, 500mA MIN.
3. MIDI THRU: use to transmit MIDI data received on the MIDI IN connector.
4. MIDI OUT: transmit MIDI data originated by itself.
5. MIDI IN: received MIDI data.
6. DMX OUT : DMX output.
7. DMX POLARITY SELECT: select the polarity of DMX output.
8. AUDIO INPUT: line in music single.100mV-1Vpp.
9. REMOTE CONTROL: FULL ON and BLACK OUT are remote controlled using 1/4`` stereo
jack.
10. FOG MACHINE: connect fog machine.
3 – Operating instructions
1. RECORD ENABLE
1) Press and hold RECORD KEY.
2) Press FLASH 1 FLASH 6 FLASH 6 FLASH 8 keys in sequence.
3) Release RECORD, the led is lighting, recording is ready.
2. ERASE ALL PROGRAMS
move to adjust chasing speed.
when activated, whole channel output will be maximum and disable
press it once and the program go one step.
press it to get into audio control.
press and hold it, whole output will be hold.
SCENES mode, press it to select SINGLE CHASE OR MIX CHASE. In
15
SCENES DOUBLE RESET or
Advertisement
