Advertisement
Available languages
Available languages
1) Press and hold RECORD KEY.
2) Press FLASH 1 FLASH 4 FLASH 2 FLASH 3 IN SEQUENCE.
3) Release RECORD.
3. CLEAR MEMORY
1) Press RECORD key, and then press REC CLEARR KEY.
2) Release RECORK and REC CLEAR at a time.
4. RECORD PROGRAM
1) Set desired channel and record it.
2) Light the relevant page led.
3) Press, RECORD then press appropriate FLASH.
4) Release RECORD.
For example: create a program, record it in the 28th SCENE.
1) Clear memory.
2) Light 1-24 SINGLE LED.
3) Set channel slider 1-24 to min. position and MASTER A to max. position.
4) Move slider 1 to max. position, press RECORD then move it to min. Position. Continue
moving other sliders until all sliders are set.
5) Press PAGE key to light page 3 led.
6) Press RECORD, then press FLASH 16.
7) Release RECORD and FLASH 16, the program of 1-24 full on in sequence is recorded in the
28th SCENE.
5. DELETE A PROGRAM
1) Press PAGE to light the desired PAGE LED.
2) Press RECORD, the press appropriate FLASH twice.
For example: to delete the 40th SCENE PROGRAM.
1) Press PAGE to light page 4 led.
2) Press RECORD, then press FLASH 16 twice.
3) Release RECORD.
6. SCENE EDIT ENABLE
1) Press PAGE light desired PAGE led.
2) Press MODE SELECT to light CHASE
3) Press EDIT and desired scene FLASH.
4) Release EDIT and the FLASH, the relevant SCENE LED is lit and others go out, now editing
is enable.
For example: to make the 11th SCENE program enter EDIT mode.
1) Press PAGE to light PAGE 1 led.
2) Press MODE SELECT to light CHASE
3) Press EDIT and FLASH23.
4) Release EDIT and FLASH 23.
7. EXIT EDIT MODE
1) Press RECORD, then press EXIT.
2) Release RECORD and EXIT.
8. DELETE STEP
1) in EDIT mode, press STEP to execute the program till the step to be deleted.
2) Press DELETE. The step is deleted and the next step is executed.
9. ADD STEP
1) IN EDIT mode. Record the step to be inserted.
2) Press STEP to execute the program till the step you want to insert before.
10. MODIFY STEP
1) In EDIT mode. Press STEP to execute the program till the step to be modified.
2) Press UP or DOWN and desired FLASH, the output will show on display, you feel it is ok
release FLASH
11. Change showing mode of dimmer PRESS and hold RECORD, then press 0% or 0-255 KEY.
12. SELECT AND RUN PROGRAM
SCENES led.
SCENES LED.
16
Advertisement
