Ricoh JP5800 Service Manual page 96

1 March, 2000 SERVICE PROGRAM MODE
20: 2-070 (Auto Combine Original mode)
This SP mode determines the use of the Combine key.
0: Normal – The Combine key accesses the Combine feature, in which two
originals can be combined onto one copy
1: Automatic – The Combine key accesses the Auto Combine feature, in which the
same original is printed twice or four times on the copy
This SP mode is only referred to when using the exposure glass. From the ADF,
Auto Combine is always used if more than one original is placed.
The default is Normal.
21: 2-080 (Double count-up for A3 masters)
0: The counters go up by 1 only.
1: The master counter goes up by 2.
2: The master and print counters both go up by 2.
22: 2-090 (
APS A5 Size Detection)
This determines how the machine behaves if the APS sensors cannot detect the
original because it is too small
0: No original detected, 1: A5 assumed
Default: 0
23: 2-120 (Exit Wing Position)
This determines the position of the wings on the paper delivery table.
0: Auto (determined by the setting of SP6-100 for the currently-used paper type)
1: Always Up (regardless of SP6-100), 2: Always Down (regardless of SP6-100)
4-29