Ricoh JP5800 Service Manual page 82

Hide thumbs Also See for JP5800:

Table of Contents

1 March, 2000

4. Using the number keys, enter the desired Sub Menu Number (listed in the

service program table), then press the OK key on the bottom of the LCD (or the

Enter (#) key).

NOTE: The sub menu number can be shifted up or down by pressing the Prev.

or Next key [A] on the bottom of the LCD.

5. Some sub menu items (but not all of them) have menus below them. Using the

Prev. or Next key [A] on the bottom of the LCD, select the desired menu item.

NOTE: These menus are not accessible by entering the number with the

number keys.

6. Follow the "Change Adjustment Values or Modes" procedure below.

NOTE: To cancel the SP mode, press the Clear Modes key or the Return (or

End) key on the bottom of the LCD.

Change Adjustment Values or Modes

1. After entering the desired SP mode, pressing the OK key on the bottom of the

LCD (or the Enter (#) key). The current value or mode will be displayed on the

LCD (at the end of the second line).

2. Enter the desired value or mode using the number keys (listed in the service

program table).

NOTE: Use the " key to toggle between + and -.

3. Press the OK key to store the desired value or mode.

4. To cancel the SP mode, press the Clear Modes key or the Return (or End)

key on the bottom of the LCD.

SERVICE PROGRAM MODE

4-15

Table of Contents