Ricoh JP5800 Service Manual page 14

MACHINE INTERIOR
1. Main Switch
2. Paper Alignment Wing
Knobs
3. Paper Alignment Wings
4. Paper Delivery End Plate
5. Paper Delivery Tray
6. Paper Delivery Side Plates
7. Handle E1
8. Guide Plate Lever
9. Ink Holder
10. Drum Unit Lock Lever B1
11. Drum Unit
12. Exposure Glass (also
called the Contact Glass)
13. Platen Cover or Document
Feeder (Option)
14. Trailing Edge Guides
Use to turn the power on or off.
Use to lift or lower the paper alignment wings.
Lift or lower the wings depending on the type of
paper being used.
This plate aligns the leading edge of prints.
Completed prints are delivered here.
These plates align the prints on the paper
delivery tray.
Use to pull out the master eject unit.
Turn to remove misfed paper.
Set the ink cartridge in this holder.
Lower to unlock and pull out the drum unit.
The master is wrapped around this unit.
Position originals here face down for printing.
Lower this cover over an original on the
exposure glass.
Swing out these guides when you use A4, 8
x 11" ä, or B5 ä paper.
1-8
1 March, 2000
"
1/2