Clearing The Factory Settings (Sp7-1) - Ricoh JP5800 Service Manual

Hide thumbs Also See for JP5800:

Table of Contents

SERVICE PROGRAM MODE

4.4.3 CLEARING THE FACTORY SETTINGS (SP7-1)

CAUTION

Performing "Clear factory settings" (SP7-1) resets a part of the settings

stored in the RAM to their default settings. Normally, this SP mode should

not be used. This procedure is required only after replacing the RAM on the

MPU or when the machine malfunctions due to a damaged RAM.

The following data is not cleared even after performing "Clear factory

settings" (SP7-1).

• SP2-10: Sizes in Metric or Inch

• SP2-11: Select Language Type

• SP2-380: Japanese Display Type (Do not use.)

• SP2-390: A3/DLT Drum Selection

• SP2-421: Type of Thermal Head (Do not use.)

• SP3-70: Machine Serial Number

• SP3-73: Clock

• SP6- All : System Adjustment

1. Save the data SP mode in order to restore it later.

NOTE: If possible, print out all system parameter lists using SP8-70, 71, 72,

73, and 74. The optional memory board is required to use the data

printout function.

2. Enter SP7-1.

3. Press the Enter (#) key while holding the "0" key.

NOTE: When the sequence is successful, "Cleared" is displayed.

4-64

1 March, 2000

Table of Contents