Tandem Back Plate Drive Unit Removal - Ricoh JP5800 Service Manual

PAPER TRAY

6.1.4 TANDEM BACK PLATE DRIVE UNIT REMOVAL

[A]
Left
View
1. Remove the lower left cover [A] (4 screws).
2. Disconect the connector [B].
3. Pull out the back plate drive unit [C].
NOTE: When installing the back plate drive unit, hook the bracket [D] onto the
back plate drive unit, then slide it in. Finally, firmly push it onto the 2 pins
[E].
[B]
6-4
[E]
[C]
C232R006.WMF
1 March, 2000
[D]