Paper Feed Section (Main Body); 1Timing Belt Tension Adjustment For The Registration Motor - Ricoh JP5800 Service Manual

PAPER FEED SECTION (MAIN BODY)

6.3 PAPER FEED SECTION (MAIN BODY)
6.3.1 TIMING BELT TENSION ADJUSTMENT FOR THE
REGISTRATION MOTOR
1. Make sure that the distance between the motor and the flange is 8 ± 0.5 mm.
2. Apply a 500g load to the center of the belt using a tension gauge. Make sure
that the belt deflects between 2 to 4 mm. If the tension is incorrect, move the
motor up or down.
2 ~ 4 mm
C232R014.WMF
8 ± 0.5 mm
6-18
1 March, 2000