This is the maximum level of vibration measured during testing in one of the axes, and this should also be taken into account when making a risk Thank you for purchasing this CLARKE Jig Saw, which is designed for DIY and light workshop assessment.
Safety Precautions Vibration Emissions HAND-ARM VIBRATION WARNING: As with all machinery, there are certain hazards involved with their operation Employers are advised to refer to the HSE publication “Guide for Employers”. and use. Exercising respect and caution will considerably lessen the risk of personal injury.
15. When cutting metals, always use a cooling agent i.e. cutting/soluble oil. A wide range of accessories is available from your nearest CLARKE dealer, for further information, contact your nearest dealer, or telephone CLARKE International Sales 16.
Carbon Brush GRCJS2032 used (as indicated by marking or colour code). GRCJS2013 Rotor GRCJS2033 Screw 4. Replacement fuse covers can be obtained from your local Clarke dealer or most electrical stockists. GRCJS2014 Bearing GRCJS2034 Fixing Plate FUSE RATING GRCJS2015 Centering Plate...
90°, (check roller is still only just touching blade). Parts & Service Maintenance For Spare Parts and Service, please contact your nearest dealer, or CLARKE Always inspect the tool before use, and ensure it is in top condition. International, on one of the following numbers.