Operation - Zanussi ZKT6050 User Manual

Operation

The ceramic hob
WARNING!
Do not use the appliance if the ceramic glass
is damaged. If a fault or crack becomes
visible, disconnect the appliance
immediately from the electricity supply and
contact your local service force centre.
Using the hob
•
The hob must be switched on
setting any cooking function or programme.
•
For single hotplates press the increase
or decrease control to vary the heat
setting. The highest number represents
the hottest setting and the lowest number
represents the coolest setting. Choose a
setting appropriate to the quantity and type
of food to be cooked.
•
To turn off a hob element press increase
and decrease controls together.
Automatic warm up
All cooking zones are equipped with an
automatic warm up function. The cooking zone
switches to full power for a certain amount of
time and then automatically switches back to
the heat setting set.
Press the increase
through the heat settings to 9 then press the
increase control again 'A' will show in the
display. An audible signal will sound. Now
press the decrease control to the setting you
require. The hob will show 'A' in the display
until the Automatic warm up programme has
finished then returns to the setting set.
12
before
control and scroll
Using the stop + go function
The stop + go function switches all cooking
zones that are switched on to the keep warm
setting and then back to the heat setting that
was previously set.
This function can be used to briefly interrupt
and then continue the cooking process.
To switch on press the stop and go control.
The hob display will show the keep warm
symbol .
To switch off press the stop and go control.
The display will revert to the heat setting that
was previously set.
Using the hob timer
All cooking zones can use each one of the two
timer functions at the same time.
If a cooking zone is switched off, the timer
function set is also switched off.
Function Condition
Automatic cut- A heat
out setting is set
Cooking
Countdown
zones not in
timer
use
Outcome
Acoustic
signal
00 flashes
Cooking
zone
switches off
Acoustic
signal 00
flashes