Settings And Adjustment; Function Key Configuration - G+M Elektronik VA-FMCT-500 Manual

Microphone console

Hide thumbs

page of 12

/ 12
Bookmarks

MICROPHONE CONSOLE VA-FMCT-500

3. Settings and adjustment

SETTINGS AND ADJUSTMENT

By pressing the «Configuration» (B) while viewing the Keypad, it is possible to access the configuration menu of the

VA-FMCT-500. To return to the main screen, press «Escape».

SETTINGS AND ADJUSTMENT

By pressing the 'Con guration' (B) while viewing the Keypad, it is possible to access the con guration

menu of the TSC6000-EN. To return to the main screen, press 'Escape'.

Function key con guration

3.1 Function key configuration

This screen page enables the broadcasting zones to be associated with the function keys from F1 to F6. Using this option, it

will be possible to send messages to a pre-selected group of zones pressing a single key.

N.B.: Each key is factory set to call all the zones (green). It is possible, using the "Reset all zones"

N.B.: Each key is factory set to call all the zones (green). It is possible, using the «Reset all zones» key, to change this setting

key, to change this setting by clicking only once (the zones that are not associated will be red).

by clicking only once (the zones that are not associated will be red). Starting out from this condition, it is possible, for examp-

4.1

Function key con guration

le, to configure key F1:

This screen page enables the broadcasting zones to be associated with the function keys from F1

• Press F1: The wording «Function key 1 configuration» will appear above the list to confirm the selection made.

to F6. Using this option, it will be possible to send messages to a pre-selected group of zones pressing

a single key.

• Use the «Up» and «Dn» keys to browse through the list and select the zones to be associated with the key (in the examp-

le, 1, 2, 3 and 4).

N.B.: Each key is factory set to call all the zones (green). It is possible, using the "Reset all zones"

key, to change this setting by clicking only once (the zones that are not associated will be red).

• Press «Save changes», then «Escape» to return to the configuration menu.

gm-elektronik.swiss | adm@gm-elektronik.swiss

TSC6000-EN

Starting out from this condition, it is possible, for

example, to con gure key F1:

Press F1: The wording "Function key 1

con guration" will appear above the list to

con rm the selection made.

Starting out from this condition, it is possible, for

example, to con gure key F1:

Use the 'Up' and 'Dn' keys to browse

through the list and select the zones to be

associated with the key (in the example, 1,

2, 3 and 4).

Press 'Save changes', then 'Escape' to

return to the con guration menu.