MICROPHONE CONSOLE VA-FMCT-500
3.2. Zone key configuration
4.2
Zone key con guration
This screen page enables the 60 available keys to be configured separately and to customise their names. By way of examp-
This screen page enables the 60 available keys to be con gured separately and to customise their
le, try configuring key no. 1 as associated with zone 1 and identify it as «Offices».
names. By way of example, try con guring key no. 1 as associated with zone 1 and identify it as 'Uf ci'.
4.2
Zone key con guration
This screen page enables the 60 available keys to be con gured separately and to customise their
names. By way of example, try con guring key no. 1 as associated with zone 1 and identify it as 'Uf ci'.
1. Select the item 'Key 1' from the list of keys: the wording "Zone key 1 con guration" will appear
1. Select the item «Key 1» from the list of keys: the wording «Zone key 1 configuration» will appear on the screen, showing
on the screen, showing that key no. 1 is being dealt with.
2. Press the 'Zone/name edit' key, then the '1' key: the wording "Zone num.: 1" will appear.
that key no. 1 is being dealt with.
1. Select the item 'Key 1' from the list of keys: the wording "Zone key 1 con guration" will appear
Press 'Enter' to con rm.
on the screen, showing that key no. 1 is being dealt with.
2. Press the «Zone / name edit» key, then the «1» key: the wording «Zone num.: 1» will appear. Press «Enter» to confirm.
3. Press the 'Zone/Name edit' key again and digit 'uf ci': the wording "Zone name: "uf ci" will
2. Press the 'Zone/name edit' key, then the '1' key: the wording "Zone num.: 1" will appear.
3. Press the «Zone / name edit» key again and digit «Offices»: the wording «Zone name: offices» will appear. Press «Enter» to
appear. Press 'Enter' to con rm.
Press 'Enter' to con rm.
confirm.
4. Press 'Save changes' to save the con guration.
3. Press the 'Zone/Name edit' key again and digit 'uf ci': the wording "Zone name: "uf ci" will
Continue in the same manner for the other keys.
appear. Press 'Enter' to con rm.
4. Press «Save changes» to save the configuration.
4. Press 'Save changes' to save the con guration.
Continue in the same manner for the other keys.
Continue in the same manner for the other keys.
UK
Level con guration
3.3 Level configuration
This screen page can be used to adjust the levels of the following parameters:
Volume of the failure signalling buzzer (beep).
• Beep level Volume of the failure signalling buzzer (beep)
Volume of the test tone.
• 20 kHz level Volume of the test tone
-7dB to 24dB.
• Output level -7 dB to 24 dB.
Level of sensitivity of the microphone (to be lowered in the event of a so-called
• Mic. sens Level of sensitivity of the microphone (to be lowered in the event of a so-called Larsen effect due to closeness
"Larsen effect" due to closeness of the station to the speakers).
of the station to the speakers).
Move the cursors along the bar until the required level is reached. Press «Escape» to return to the previous screen page.
Unit con guration
gm-elektronik.swiss | adm@gm-elektronik.swiss
TSC6000-EN
TSC6000-EN
Offices
TSC6000-EN
31
31
UK
UK
Page 10 | 12
Datasheet 1811.001