Advertisement
Step by step assembly instructions
Step One
Attach the Under Base (4) to the Headboard (1) and Footboard (2) using Rect. Connector (E) and
JCBC Screw M8 x 75 mm (A) and hand-tighten to loosely secure parts together. Do not tighten
with Allen Key (H) until you have put all parts together.
A
A
1
Step Two
Attach the Back Guardrail (6) to the Upper Base (3) using JCBC Screw M6 x 15 mm (D), then to the
Headboard (1) and Footboard (2) using Washer (F) on the inside of the headboard (as shown) and
JCBC Screw M6 x 55 mm (C). Again, hand-tighten parts together. Repeat for the Front Guardrail (5).
C
C
1
3
E
A
E
A
6
5
D
C
C
A
E
E
A
2
E
LOOSELY SECURE PARTS
4
TOGETHER IN EACH STEP
SO ALL PARTS FIT
TOGETHER SMOOTHLY UNTIL
TIGHTENING AT THE END
C
C
2
D
D
3/5
A
A
A
H
F
F
C
C
PLEASE NOTE THE
WASHERS (F) SHOULD
BE PLACED ON THE
INSIDE OF THE
HEADBOARD (1) AS
SHOWN ABOVE
D
E
Advertisement
