Door Reversal - Zanussi ZI 918/12 K Instruction Booklet

Instructions for totally built-in
appliances

Door reversal

The appliance is supplied with the right
or left door opening. To change the opening
direction of the doors proceed as in the
following instructions before installing it.
1. Unscrew the upper pin and remove the spacer
2. Remove the upper door
3. Unscrew the middle hinge and the brackets and
refit them on the opposite side
4. Refit the upper door, the upper pin and the
spacer on the opposite side
5. Unscrew the lower pin and remove the spacer
and refit them on the opposite side
Recess dimensions
Height (1) 1780 mm
Depth (2) 550 mm
Width (3) 560 mm
To ensure adequate ventilation, allow the clearances
shown in figure.
Furthermore, it is necessary that the cabinet has a
ventilation recess with the following dimensions:
depth 50 mm
width 540 mm
min.
50 mm
2
200 cm
D567
3
2 1
PR01
min.
200 cm 2
17