Zanussi ZI 918/12 K Instruction Booklet page 19

Separate parts A, B, C, D as shown in the figure
B
A
C
D
PR266
Place guide (A) on the inside part of the furniture
door, upper and lower position as shown in the figure
and mark the position of external holes. Having
drilled the holes, fix the guide with the screws
A
supplied.
PR166
Fix cover (C) on guide (A) until it clips into place.
A
C
PR33
Open the appliance door and the furniture door at
90°. Insert the small square (B) into guide (A). Put
8mm
together the appliance door and the furniture door
and mark the holes as indicated in the figure.
Remove the squares and drill holes with ø 2 mm at
8 mm from the outer edge of the door. Place the
small square on the guide again and fix it with the
screws supplied.
A
B
PR167
19