ABB RET650 Series Commissioning Manual page 37

1MRK 504 136-UUS B
IEC13000060 V1 EN-US
Figure 6:
5. Select Obtain an IP address automatically if the parameter
the IED.
IEC13000061 V1 EN-US
Figure 7:
6. Select Use the following IP address and define
used and if the
IP address must be different from the IP address chosen for the IED.
Transformer protection RET650
Commissioning manual
IEC13000060-1-en.vsd
Select the TCP/IPv4 protocol and open Properties
IEC13000061-1-en.vsd
Select: Obtain an IP address automatically
IP address is not set to be obtained automatically by the IED, see
© Copyright 2013 ABB. All rights reserved
DHCPServer is set to Enabled in
IP address and Subnet mask if the front port is
Section 4
Starting up
Figure 8. The
31