Schlage BE469 How To Pairing page 4

How to Unpair / Disconnect / Unlink a Logitech Harmony Home Hub Extender from a
Schlage Wireless Lock BE469 (via iOS)
Step 4
​ P roceed by pressing on the 'Schlage' button at the front of the Schlage Lock followed by
your unique programming code which you can find on the sticker on your instruction
manual.
Finish by tapping on '0' on the Schlage Lock.
You will be shown a success message, a green check mark, on the Schlage Lock.
Indicating that the unpairing process was successful.
SmartHomeDB
www.smarthomedb.com Page 4 of 5