Mitsubishi Electric GOT1000 Series User Manual page 18

Number Name
5) Indicator LEDs
6) Connector
7) Module fixing screws
8) Terminal block
9) Rating plate
10) Mounting screw
11) Interface connector
12) Extension connector
Data link status can be conformed by the on/off statuses of
the LEDs.
LED
Name
RUN On : Indicates that the module is normal.
LED Off : Indicates a watchdog timer error.
On : Indicates that communication is normal.
L RUN
Off : Indicates a communication break
LED
(time excess error).
SD LED On : Indicates data transmission.
RD LED On : Indicates data receive.
On : Indicates a communication data error
(CRC error).
L ERR.
Flicker : Indicates that any switch (1 to 4) position
LED
was changed while power is on.
Off : Indicates that communication is normal.
Connector for connection to the GOT
Screws for installation to the GOT (M3 3 screw)
Terminal block for cable connection (M3 8 screw)
Mounting screw to be fixed with the GOT main unit
Connector connecting to GOT
Connector connecting with A8GT-J61BT13
8
Description
Description
-