eeese Lea User Manual page 41

UK
1. Introduction
Cooling
Cooling with the Lea is a perfectly natural and affordable cooling method with low energy
requirements. The device produces moist cool air by using the evaporative cooling princi-
ple. The hot room air is cooled by being sucked through an absorbent filter that is soaked
with water.
The Lea is best suited for smaller spaces where doors and windows are wanted to be
kept open. In the humid northern regions, the unit's exhaust air will likely be cooled by
between 3 and 5 degrees, depending on the temperature and humidity of the intake air.
Therefore, the Lea is unable to cool a room from 30°C to 23°C, but the less the humidity,
the more the Lea can cool a room.
There is no water discharge as in the case of mobile air conditioning units, neither is hot
air discharged through a window, a door or a hole in the wall. It makes Lea flexible and
easy to handle. Fill the tank with water, connect it to a power source and press ON.
The evaporator is in accordance with international standards for environmental protection
Filtering
This device filters out harmful micro-substances such as dust, fibres and the like from
the air.
Evaporation
The Lea will add moisture to dry air and maintain a healthy moisture balance in indoor
living areas for the benefit of the skin and eyes.
Air flow selection
The unit has 8 airflow options that meet a wide range of needs.
Choice of air flow type
Choose between three types of air flow mode: Smooth which gives off a constant
breeze, Varied, which simulates a natural breeze and Night, which is a muted version of
the Varied mode.
Air flow direction
By automatically oscillating, this unit can blow out air over a radius of 120 degrees.
41
MV-2512-01-2020 . eeese-aircare.com © All rights reserved eeese air care ApS