eeese Lea User Manual page 45

3. Safety instructions
IMPORTANT
Use a standard power supply of AC 220 V ~ 50 Hz.
After filling with water, do not tilt or bump into the unit. The unit must not tip over
when it is in operation, as otherwise an accident may occur.
• The air cooler must not be covered and avoid placing
anything heavy on top of it. The air exhaust must
not be blocked and there must be an obstructed
space of at least one metre in front of and behind the
unit in order for the air to be able to flow freely.
• The working temperature for this unit is between 0
°C - 40 °C. The device must not be placed in extreme-
ly high or low temperatures. In summer when it is
very hot, the quality of the water deteriorates faster,
and can begin to smell. It should therefore be frequently replaced.
• Use a damp cloth to clean the outside (possibly with a small amount of cleaning agent).
Do not use corrosive cleaning agents or solvents for this purpose, because it will ruin
the surface of the unit. Rinsing with water is absolutely not allowed.
• During storage or transport the water tank must be emptied. Allow the unit to blow
without cooling until the filter is completely dry before packing the unit. This in order to
avoid the formation of mould on filter.
• Remove the plug from the electricity socket when the unit is not in use for extended
periods of time.
• If the power cord is damaged, it must only be replaced by the manufacturer, their ser-
vice agent or a similarly qualified professional.
• This appliance is not intended for use by anyone (including children) who has impaired
physical, sensory or mental capacity or anyone who lacks the required experience and
knowledge, except under supervision or after training in the use of the device by a
person, who is also responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
MV-2512-01-2020 . eeese-aircare.com © All rights reserved eeese air care ApS
UK
45