Orbea BLUE PAPER AVANT H DISC 2021 Technical Manual page 17

32 | O RB EA
M U DG UA RD AS S EMB LY
14.1
14.2
14.4
14.5
14.3
GREASE
1 4 R EA R M UD G UAR D B RIDG E . R OA D A LLOY
ART Nº: X 07 700 0 0
14.1 M/GUARD BRIDGE LEFT
14.2 M/GUARD BRIDGE RIGHT
14.3 BOLT M5x15
14.4 WASHER M5
14.5 BLOCKING NUT M5
0 9 T HR U-AX LE R OAD 1 2x 1 1 9 MM . D OU B LE LEA D TH REA D 2 P1. 0x 13MM
Integrated mudguard threads
ART Nº: X 0740 0 0 0
9.1 AXLE ROAD 12x119x2P1.0x13mm
9.2 AXLE WASHER 12mm
T EC HN I CAL M A NUAL
9
GREASE
GREASE
Q UA N T I TY
1
1
3
3
1
Q UA N T I TY
1
1
B LUE PAP ER AVA N T · H DI SC 2 0 2 1
CUTTING T HE ORCA OMR F ORK STE ER ER TUBE
AND HEADS ET S PACE R INSTALLATI ON
Due to the front brake hose being internally routed
through the fork´s blade and steerer tube, removing the
fork on Avant H Disc requires to disconnect the front brake
caliper hose.
However, it is not necessary to disconnect the front caliper
to cut the fork´s steerer tube to the desired height.
Simply disassemble the OC1 stem from the steerer tube
and remove the headset spacers (these can be split in two
halves to allow you to remove them without interfering
with the cabling).
With the fork completely inserted into the headtube and
the bike positioned so the fork is horizontally positioned
to avoid debris from falling into the headset, use a steerer
tube cutting guide and a carbon or aluminum specific saw
(depending on the steerer tube material) to cut the steerer
to the desired height. Measure the final height of all com-
ponents before cutting the steerer tube.When cutting, be
careful not to damage any components or cables.
The installation or removal of headset spacers does not
require to remove any cables. They are composed of two
halves that allow for easy installation without interfering
with the cabling.
O R B EA | 33
EN
Cutting the fork steerer tube requires advanced
mechanical skills and must by performed by a
professional bicycle mechanic.
Never install headset spacers above the stem.
The steerer tube lenght must be set so no spac-
ers are needed above the stem.
When installing headset spacers (40mm max-
imum), make sure that the steerer tube is long
enough to allow for a correct and safe installation
of the stem and that the cables are long enough