Bluetooth - Audio; Listen To The Audio Player Via Bluetooth; Listen To Ipod/Iphone Via Bluetooth - JVC KD-X472BT Instruction Manual

Bluetooth®
Bluetooth — Audio
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.

Listen to the audio player via Bluetooth

1 Press B SRC repeatedly to select BT AUDIO (or press SOURCE on the
remote control).
• Pressing enters BT AUDIO directly.
2 Operate the audio player via Bluetooth to start playback.
To On the faceplate
Play back/pause Press the volume knob.
Press 2 J / 1 K.
Select group or
folder
Reverse skip/ Press S / T.
Forward skip
Reverse/Fast- Press and hold S / T.
forward
20
ENGLISH
To
Repeat play
Random play
Select a file from a
folder/list
Switch between
connected
Bluetooth audio
devices
*1 Depending on the connected device, some devices may not support this feature.
*2 Pressing the "Play" key on the connected device itself also causes switching of sound output
from the device.
On the remote control
Operations and display indications may differ according to their availability
Press d.
on the connected device.
Press J / K.

Listen to iPod/iPhone via Bluetooth

Press H / I.
You can listen to the songs on the iPod/iPhone via Bluetooth on this unit.
Press B SRC repeatedly to select iPod BT.
Press and hold H / I.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB
input terminal. (Page 9)
• If you plug in an iPod/iPhone to the USB input terminal while listening to
iPod BT source, the source automatically changes to iPod USB source.
Press B SRC to select iPod BT source if the device is still connected via
Bluetooth.
On the faceplate On the remote control
Press 4 B repeatedly.
( Not available )
[TRACK REPEAT], [ALL REPEAT],
[GROUP REPEAT]*1, [REPEAT OFF]
Press 3 A repeatedly.
( Not available )
[GROUP RANDOM]*1,
[ALL RANDOM], [RANDOM OFF]
Refer to "Select a file to play"
( Not available )
on page 10.
Press 5.*2
( Not available )
(for KD-X472BT)