Radio
The unit switches to FM alarm automatically when receiving an alarm signal
from FM broadcast.
Search for a station
1
Press B SRC repeatedly to select FM, AM, SW1 or SW2.
2
Press S / T (or press H / I on the remote control) to search for a
station automatically.
(or)
Press and hold S / T (or press and hold H / I on the remote
control) until "M" flashes, then press repeatedly to search for a station
manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM/SW1/SW2.
Store a station
While listening to a station...
Press and hold one of the number buttons (1 to 6).
(or)
1
Press and hold the volume knob until "PRESET MODE" flashes.
2
Turn the volume knob to select a preset number, then press the knob.
"MEMORY" appears once the station is stored.
Select a stored station
Press one of the number buttons (1 to 6).
(or)
1
Press
.
2
Turn the volume knob to select a preset number, then press the knob.
Other settings
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press
to exit.
To return to the previous setting item, press
[TUNER SETTING]
[RADIO TIMER]
(For KD-X472BT)
Turns on the radio at a specific time regardless of the current source.
1 [ONCE]/[DAILY]/[WEEKLY]/[OFF]: Select how often the timer will be
turned on.
2 [FM]/[AM]/[SW1]/[SW2]: Select the source.
3 [01] to [18] (for FM)/[01] to [06] (for AM/SW1/SW2): Select the preset
station.
4 Set the activation day*1 and time.
"M" indicator lights up when complete.
Radio Timer will not activate for the following cases.
• The unit is turned off.
• [OFF] is selected for [AM SRC]/[SW1 SRC]/[SW2 SRC] in
[SOURCE SELECT] after Radio Timer for AM/SW1/SW2 is selected.
(Page 6)
.
Default: [XX]
7
ENGLISH