Bluetooth - Audio - JVC KD-X282DBT Instruction Manual

Bluetooth®
(for KD-X282DBT)
After pairing is done successfully, "PAIRING OK"
and Bluetooth compatibility check starts.
If "CONNECT NOW USING PHONE" appears, operate the Bluetooth device to
allow phonebook access to continue.
"TESTING" flashes on the display.
The connectivity result flashes on the display.
"PAIRING OK" and/or "HANDS-FREE OK"*1 and/or "AUD.STREAM OK"*2 and/
or "PBAP OK"*3: Compatible
*1 Compatible with Hands-Free Profile (HFP)
*2 Compatible with Advanced Audio Distribution Profile (A2DP)
*3 Compatible with Phonebook Access Profile (PBAP)
After 30 seconds, "PAIRING DELETED" appears to indicate that pairing has
been deleted, and the unit exits check mode.
• To cancel, press and hold B SRC to turn off the power, then turn on the
power again.
KD-X282DBT_E_B5A-3845-00_EN_1st Draft.indd 19 KD-X282DBT_E_B5A-3845-00_EN_1st Draft.indd 19
"Device Name" appears Bluetooth — Audio
• Operations and display indications may differ according to their availability
on the connected device.
• Depending on the connected device, some features may not work with
your device.
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
Listen to the audio player via Bluetooth
1 Press B SRC repeatedly to select BT AUDIO.
• Pressing
2
Operate the audio player via Bluetooth to start playback.
To
Play back/pause
Select group or folder
Reverse skip/Forward skip
Reverse/Fast-forward
enters BT AUDIO directly.
On the faceplate
Press the volume knob.
Press 2 J / 1 K.
Press S / T.
Press and hold S / T.
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
ENGLISH 19
7/9/2021 4:26:59 PM 7/9/2021 4:26:59 PM